Print Page | Close Window

Protech Distributor drop in? Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=18116 Printed Date: February-02-2025 at 3:45pm Topic: Protech Distributor drop in? Posted By: tommer12 Subject: Protech Distributor drop in? Date Posted: June-20-2010 at 3:48pm I had to pull my protech distributor out when I did my heads... I cant figure out the correct way to put it back in. It wont drop the last 1/2" down. I assume this video explains a thousand words correct? Any other tricks from the pros to get it to drop? http://www.youtube.com/watch?v=YdIGZ-tVuZA ------------- 84 SN, 92 SNOB, 2005 SANTE 2006 SN 206 Replies: Posted By: hotboat Date Posted: June-20-2010 at 10:16pm try aligning the oil pump driveshaft with the bottom of distributor, I cant remember if its a flat head or hex. either move the distributor a tooth or two and work your way back if needed ------------- Brian

Print Page | Close Window