GT-40P' s
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=18248
Printed Date: April-22-2025 at 3:05pm
Topic: GT-40P' s
Posted By: eric lavine
Subject: GT-40P' s
Date Posted: June-29-2010 at 1:38pm
4 slashes, BRAND NEW with valves, springs retainers, need drilled for 351w, they are at my shop,
600.00 firm plus shipping...selling for a friend, call me if interested 330-322-8817
Eric
------------- "the things you own will start to own you"
|
Replies:
Posted By: TRBenj
Date Posted: June-29-2010 at 2:13pm
Youre gonna need more info if youre gonna get any bites here, Eric. Six hundred large ones will buy you a set of new/reman'd P's from Tristate with a 3 angle valve job, oversized valves and upgraded (good for .550 lift) springs. $400 will buy you new/reman'd P's with the stock valvetrain from Clearwater. Either place will include the drilled out holes and brass casting plugs for no charge.
Fill us in on the valvetrain and casting plugs.
-------------
|
Posted By: eric lavine
Date Posted: June-29-2010 at 4:57pm
plugs bronze, new not newused. big difference....new borg warner 1800 rebuilt 750.00. lol if i had a choice between the 2 for the same $$$, i would go with the new
actually, however they come new from Ford. just trying to help a friend, he has more than that in them
oh yeah, stainless valves, single angle i believe...
------------- "the things you own will start to own you"
|
Posted By: eric lavine
Date Posted: July-03-2010 at 11:34am
these are brand new!!!!!!!!!!!
------------- "the things you own will start to own you"
|
Posted By: behindpropeller
Date Posted: July-07-2010 at 7:31pm
These the ones you had a couple years ago?
-------------
|
Posted By: eric lavine
Date Posted: July-08-2010 at 10:17am
nope sold those for 200.00....I believe Alan picked those up for a guy and took them to Lake George? this guy with the heads was hoping to put a Cobra together....but got married....need i say more,
I think it was a trade off, sell the heads and you might get some h
------------- "the things you own will start to own you"
|
Posted By: eric lavine
Date Posted: July-16-2010 at 10:27am
he is down to 500.00
------------- "the things you own will start to own you"
|
Posted By: MartyMabe
Date Posted: July-18-2010 at 11:07pm
Hey Hey now do I hear $400? $425?, I hear $350 from the man in NC
------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out!
|
Posted By: eric lavine
Date Posted: July-19-2010 at 12:04pm
thats without a pocket warmer for Eric.....
------------- "the things you own will start to own you"
|
Posted By: MartyMabe
Date Posted: July-19-2010 at 12:20pm
If I purchased these heads for my stock 351w on my 93 SN, wouldn't I need an intake to go with them? If you can find me the intake, I might consider helping your pockets stay warm this winter and helping your "friend" out . Let me know.
------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out!
|
Posted By: eric lavine
Date Posted: July-19-2010 at 2:53pm
looks like someone snagged em Marty
------------- "the things you own will start to own you"
|
Posted By: kapla
Date Posted: July-23-2010 at 6:32pm
MartyMabe wrote:
If I purchased these heads for my stock 351w on my 93 SN, wouldn't I need an intake to go with them? If you can find me the intake, I might consider helping your pockets stay warm this winter and helping your "friend" out . Let me know. |
Marty
to answer this question no..you can still reuse you stock intake..but a new aluminum intake is a nice match to this heads...not to menction a little more agressive cam..and the list of performance parts can go on and on..lol.
then you could also trash the protec and install a regular style dizzy...
------------- <a href="">1992 ski nautique
|
Posted By: MartyMabe
Date Posted: July-23-2010 at 8:02pm
Dang Kap! It would be easier to buy a GT motor and put in it
Man, simple bolt-ons to get a little more oomp- but no it's gotta be difficult
------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out!
|
|