antisiphon valve
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=18305
Printed Date: November-22-2024 at 1:08pm
Topic: antisiphon valve
Posted By: malibud
Subject: antisiphon valve
Date Posted: July-02-2010 at 12:32pm
|
I thought that my lack of rpms (4000@wot) might be a fuel problem and I am trying to get the antiphon valve off . Do I have to take the tanks out ? is in the elbow? where exactly is it ? I took the elbow off and it is connected to a pick up stick.
thanks for the help I am kinda stuck right now and don't want to go too far since i wannna hit the lake today |
Replies:
Posted By: 8122pbrainard
Date Posted: July-02-2010 at 12:51pm
|
Dan,
Unless someone has removed the anti, it's the fitting between the 90 on the tank and the fuel supply hose. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: malibud
Date Posted: July-02-2010 at 1:07pm
| Big thanks again .. glad i did not take the tank out. now that it is out does the valve come apart ? My plan was to soak it it in some carb cleaner. |
Posted By: malibud
Date Posted: July-02-2010 at 1:13pm
| It looks like a ball valve how do you clean it ? |
Posted By: 8122pbrainard
Date Posted: July-02-2010 at 1:19pm
That depends on how old it is and who's manufacture it is. Most will have the ball check pressed into the fitting especially the ones with the integrated hose barb. Take it off the hose, soak it and blow some compressed air through it. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
malibud wrote:Posted By: malibud
Date Posted: July-02-2010 at 1:39pm
| thanks figured it out it has check valve w/ a spring |