Bimini top
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=18778
Printed Date: November-22-2024 at 5:00pm
Topic: Bimini top
Posted By: jdkenyon
Subject: Bimini top
Date Posted: July-28-2010 at 6:42pm
|
What is everyone's recommendation for a good bimini top? I prefer to not drill any holes in my boat but realize we can spend more time on the water if we have some shade. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1955 - 94 Ski Nautique |
Replies:
Posted By: quinner
Date Posted: July-28-2010 at 7:21pm
|
Hey Josh,
Hope all is well, missed you guy's at GL this year. Try these guy's, Joel (M3Fan) has always recommended them, may even find some past threads saying the same. http://www.gmitopdesign.com/ - GMI Biminis ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: harddock
Date Posted: July-28-2010 at 7:53pm
|
+1 on GMI
will require holes for 2 main brackets and 4 eyestraps but they are small ones. I mounted mine to the windshield frame (this location dosen't like foward tilt of top)and the front eyestaps to the vents (1998SN) using two of the screws on the vent. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4487" rel="nofollow - 1998 Ski Nautique |
Posted By: MartyMabe
Date Posted: July-28-2010 at 11:58pm
|
Get Mr.Tim Morfoot to take pics of his mounts(brackets). He screwed them in the top of the rub-rail. ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: SN206
Date Posted: July-29-2010 at 12:00am
|
There is a manufacturer out there that makes a bimini that is supported by a pole that comes straight up from the pylon. Don't think any drilling into the gel is required, but I can't speak for the quality though as I have not been on a boat with one yet. ------------- ...those who have fallen and those who will. |
Posted By: jdkenyon
Date Posted: July-29-2010 at 2:25pm
|
Sounds like GMI is the way to go. Thanks for the suggestions. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1955 - 94 Ski Nautique |
Posted By: mdvalant
Date Posted: July-29-2010 at 3:19pm
|
Here's the pylon one. Pretty cool actually...little pricey
http://www.bartswatersports.com/catalog.asp?P=19974 - Pylon Bimini  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5009 - '90 Ski (sold) http://www.correctcraftfan.com/diaries/details.asp?ID=5479 - '00 Sport Mississippi River - Bellevue, IA |
Posted By: malibud
Date Posted: July-29-2010 at 7:38pm
| that kinda looks like the umbrella I stick in the ski pole but mine is round no holes to drill fits under tower and cheap |
Posted By: jdkenyon
Date Posted: July-30-2010 at 5:39pm
|
I like the pylon one, but it is over twice as much. With all of the positive comments on the GMI I think a couple of holes would be better than spending twice as much money. Thanks for all the suggestions. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1955 - 94 Ski Nautique |