RUDDER BUSHING
Printed From: CorrectCraftFan.com
Category: CorrectCraftFan.com
Forum Name: Help CorrectCraftFan.com
Forum Discription: Learn how you can contribute to CorrectCraftFan.com
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19331
Printed Date: November-24-2024 at 6:19am
Topic: RUDDER BUSHING
Posted By: TRIUMPH
Subject: RUDDER BUSHING
Date Posted: September-05-2010 at 2:09pm
|
Greetings I am new at this. I have removed the rudder bushing from my Fish Nautique (1989) because it was damaged (bent to a 15 degree angle) when the trailer hit a hole pulling out of the water. I think I can repair it, but my question is Is the bushing supposed to be on any angle at all? or straight up 90 on the plate? Is the bushing on this boat the same as all correct crafts ? Where could I buy another one if the one I have cant be saved? Thank you for your consideration Joe ------------- THANK YOU FOR YOUR CONSIDERATION |
Replies:
Posted By: SNobsessed
Date Posted: September-06-2010 at 12:46am
|
A good source will be deep blue yatch supply. They carry just about every style made.
Not sure if it is supposed to be 90 dgrees, but that would be my 1st guess. http://www.deepblueyachtsupply.com/buckguide/buckproducts.aspx?seriesIds=92%2093%2095%2096%2097%2098%2099%20101%20102%20104%20108%20106%20107&c=Steering%20Hardware%20%3E%3E%20Buck%20Algonquin%20Ports,%20Flanges%20and%20Collars - Rudder Port ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin |
Posted By: kapla
Date Posted: September-06-2010 at 1:54am
|
no clue on the subject..but I think this post belongs to the maintenance section..it will get more attention...
Good to hear FN are coming back... welcome  ------------- <a href="">1992 ski nautique |