transmission fluid quantity?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19622
Printed Date: November-20-2024 at 12:34pm
Topic: transmission fluid quantity?
Posted By: timsdayoff
Subject: transmission fluid quantity?
Date Posted: September-30-2010 at 10:02pm
I am going to flush my tranny and replace the fluid. I've always had a shop do it. I'll have no problems but I can't find the capacity or amount of fluid I should use.
The boat is a 1987, 2001. It has the standard 351 and original transmission. Anybody know how much fluid I should use or where I can find out?
THX, Tim
-------------
Tim, born skiing in MN, now skis Vegas
|
Replies:
Posted By: SNobsessed
Date Posted: October-01-2010 at 12:31am
Tim - Have you looked at the manuals in the reference section? Use one that covers a Borg Warner tranny.
If nothing else, put back in the same amount as you take out. That's what I do.
Use Dextron III.
-------------
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin
|
Posted By: NAUTIQUEjunky
Date Posted: October-01-2010 at 1:00am
I just had to change mine with the cooler replacement, i put back in around 2.5 quarts.
-------------
1977 MasterCraft Stars&Stripes
1994 Ski Nautique
2000 Super Air Nautique
1986 Ski Nautique 2001
1999 Sport Nautique gt40 current
|
Posted By: eric lavine
Date Posted: October-01-2010 at 9:28am
so what do you think? buy 3 qts or 2.5? lol
the smartass in me usually answers this question "to the full mark"
-------------
"the things you own will start to own you"
|
Posted By: ruthroad
Date Posted: October-01-2010 at 3:19pm
I pump out old through dip stick (into jug? and replace with same amount removed.
Check your manual for type usually Dexron III.
David
-------------
David Ross
|
|