Banjo Fitting
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19898
Printed Date: November-20-2024 at 10:29am
Topic: Banjo Fitting
Posted By: harriss28
Subject: Banjo Fitting
Date Posted: November-03-2010 at 8:46pm
I installed a banjo fitting and bolt for an oil drain hose on my 97 SN. I used this instead of the standard oil drain kit because of the clearance issues.
Do you guys think this is ok? My only concern is that the bolt may work loose.
Shawn
|
Replies:
Posted By: 8122pbrainard
Date Posted: November-03-2010 at 9:08pm
Shawn,
If you used the copper "crush" washers on it, I really don't feel it will loosen up. However, I am concerned about the flow you'll get through it. The fittings are typically used for pressure applications in tight areas and have some pretty small ports through the bolt.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: harriss28
Date Posted: November-04-2010 at 2:03am
thanks pete, i may have to suck the oil out. Ill post reply in spring.
Shawn
|
|