plug chop???
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Off Topic
Forum Discription: Anything non-Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19946
Printed Date: January-10-2025 at 10:54pm
Topic: plug chop???
Posted By: kapla
Subject: plug chop???
Date Posted: November-10-2010 at 12:03am
|
Last week my vette started in a sudden to idle poor..under acceleration it will run like a champ, but coasting and at idle in wanted to die or run rough..IMHO the carb and edelbrock is a little to rich..plugs were accels and almost 4 years old..and about 3000 miles on them..so I decided to replace them...after that in run fine again..
adn I did some plug chop with some I took out...is this the correct way to do it? let me know as I have some more to do it the rigth way... 
I broke one when taking it out...tight space between the header and inner skirst...  ------------- <a href="">1992 ski nautique |
Replies:
Posted By: Luchog
Date Posted: November-10-2010 at 9:51pm
|
Kapla do you have a closeup pic on the electrodes? did you check the gap?
It wouldnt surprise me at this time of the year the carb needing a few adjustments in the air mix. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=2095" rel="nofollow - 1980 Ski Nautique Commander 351W |