Cover for 1997 Ski Nautique
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19987
Printed Date: November-22-2024 at 5:33pm
Topic: Cover for 1997 Ski Nautique
Posted By: jolocke1020
Subject: Cover for 1997 Ski Nautique
Date Posted: November-14-2010 at 10:08pm
|
I am being forced to keep my 1997 Ski Nautique outside this winter and just had the exterior wet sanded and need some advice in protecting the finish. Does anyone know of a company that will make a cover that will come down low enough to protect paint. If not does anyone have any tricks that could help me out???????
|
Replies:
Posted By: kelvin
Date Posted: November-14-2010 at 10:24pm
|
Check out www.skiboatcovers.com. They have waterline covers and will custom make the cover for you with the tie straps as the front, rear right side or left side based on your preference. Very good quality product.
|
Posted By: bhectus
Date Posted: November-15-2010 at 1:30am
I got mine from boatcoversdirect. Spent the extra money and got the sunbrella cover and one that covers the platform. Very good fit and it goes to the bottom of the stripe. Trailers well although I try not to use it while pulling behind the truck. If you want something that goes lower it will most likely be custom and big bucks.
-------------
'02 Ski Nautique 196 w/ 5.7 Apex bowtie - Sold
'87 Barefoot - sold
'97 Super Sport Nautique - originally custom built for Walt Meloon
'97 Ski Nautique
'83 SN 2001
|
Posted By: TRBenj
Date Posted: November-15-2010 at 12:11pm
Angola Canvas should also be able to make you a waterline cover. They used to supply the covers for MWCC for years, so I would expect them to have the template for your boat. I just got a quote on a cover for our BFN and the price seemed very reasonable. My sister got one from them for her Mustang and the fit is excellent and workmanship appears to be top notch.
-------------
|
Posted By: harddock
Date Posted: November-15-2010 at 3:43pm
You can also check into getting it shrink wrapped. Most boats around New England that are stored out side go this route.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=4487" rel="nofollow - 1998 Ski Nautique
|
Posted By: jolocke1020
Date Posted: November-15-2010 at 11:20pm
|
I was thinking about going this route with the shrink wrap. Can you tell me more about the process??
|
Posted By: harddock
Date Posted: November-16-2010 at 10:29am
It is just what its called. A light simple frame of wood is made inside the boat to create a high point. The plastic is draped over the boat and secured around about the waterline. Then a large heat gun warms the plastic, it gets taught and you have a cover that sheds water and much snow. New boats are shipped shrink wraped. Doors, vents , etc can be added. I have no idea as to the cost. Check with your local marinas as for prices.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=4487" rel="nofollow - 1998 Ski Nautique
|
|