99 PRO AIR NAUTIQUE
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=19997
Printed Date: November-24-2024 at 4:37am
Topic: 99 PRO AIR NAUTIQUE
Posted By: wsc
Subject: 99 PRO AIR NAUTIQUE
Date Posted: November-16-2010 at 11:11pm
|
Hi guys i am looking at an 1999 pro air nautique. I am just looking for any feedback on the boat, was it a decent boat looks like they only used the hull the one year. I do realize the super airs are v-drive the next year. Does any body know of any major problems/defects with these? It has the GT40 engine and about 100 hours. I intend to use it for boarding, tubing and skiing. Just looking for your opinion. Thanks ------------- WSC |
Replies:
Posted By: quinner
Date Posted: November-17-2010 at 1:39pm
|
The Pro Airs have the TWC hull and were available 99' thru 01' or 02'.
Take a look in the 99' brochure in the reference section as it shows both the TWC and TSC hulls. IIRC read something about the TWC hulls having issues with Perfect Pass and the slalom wake is a bit rough. 100hrs is really low, that's only about 8 per season average, not necessarily a bad thing as long as it was cared for and stored properly every year. Had a 99' Air which is virtually the same boat with a different hull, had almost no issues thru 5 seasons, ballast pumps and depth gauge were somewhat problematic and the slightest sign of weeds would take down one or both speedo's, otherwise it was a great boat. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: wsc
Date Posted: November-17-2010 at 10:59pm
|
Thanks for the info. One more question will the newer flight control towers ie 00 ,01, 02 etc fit the 99 pro air? I really don't care for the tower looks like it could be used on a building site. ------------- WSC |
Posted By: bkhallpass
Date Posted: November-18-2010 at 1:57am
|
It will fit, but will require new sets of holes to be drilled.
BKH ------------- Livin' the Dream |
Posted By: quinner
Date Posted: November-18-2010 at 1:22pm
And most likely former holes to be filled. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
bkhallpass wrote:Posted By: wsc
Date Posted: November-18-2010 at 11:05pm
|
Thanks for the info guys ------------- WSC |
Posted By: storm34
Date Posted: November-19-2010 at 12:43am
Or make them cupholders ------------- |
Posted By: Hollywood
Date Posted: November-19-2010 at 12:31pm
You must be drinking out of some really small cups...  ------------- |
Posted By: The Godfather
Date Posted: November-19-2010 at 10:50pm
|
HW, you have to stop drinking that 100* stuff. Or maybe you were thinking about the Regal style cup holders. 
I just had too, on that one.... HW Jr. |
Posted By: storm34
Date Posted: November-19-2010 at 11:32pm
|
Comeon man....I was kidding. I say leave it original! ------------- |