WTB: Airguide pitot
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=20337
Printed Date: November-18-2024 at 4:54pm
Topic: WTB: Airguide pitot
Posted By: TRBenj
Subject: WTB: Airguide pitot
Date Posted: January-11-2011 at 2:08pm
I'm looking for an Airguide pitot for our '79 BFN. The ones that were on it were fine- but they dont match. One is all black, the other is gray/black. Id like to find one (either black or gray/black) so that I have a matching pair. Id be willing to trade if someone has one available. Both function perfectly.
If anyone has one for sale outright, thats fine too- shoot me an email: TRBenj@gmail.com
|
Replies:
Posted By: Fl Inboards
Date Posted: January-11-2011 at 2:36pm
Welcome to the club!
I have been painting them with a product called bumper and trim Black 3400 by urethane supply company.
I utilize the stuff on rub rails and any other rubber or small vinyl parts. So far so good and I have found it holds up very well.
I get the stuff at my local Auto paint supply store.
------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
1993 Shamrock "fat" 20. 2008 Nautique 196 5.0
|
Posted By: TRBenj
Date Posted: January-11-2011 at 2:41pm
Thanks for the info Jody- sounds like a good Plan B.
-------------
|
Posted By: Hollywood
Date Posted: January-11-2011 at 6:22pm
TRBenj your phucked in the head,
There are two others ahead of you and I would rather throw them out then sell them to you at any price.
-------------
|
Posted By: Fl Inboards
Date Posted: January-11-2011 at 7:07pm
Hollywood wrote:
TRBenj your phucked in the head,
There are two others ahead of you and I would rather throw them out then sell them to you at any price. |
Is this a north vs south thing?
------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
1993 Shamrock "fat" 20. 2008 Nautique 196 5.0
|
Posted By: TRBenj
Date Posted: January-19-2011 at 12:27pm
Found one- thanks Gary!!!
-------------
|
Posted By: Riley
Date Posted: January-19-2011 at 12:37pm
I'm looking for one like this.
-------------
|
Posted By: TRBenj
Date Posted: January-19-2011 at 12:46pm
Bruce- thats the same as the matching pair I just put together with Gary's help. I assume this is for your Malibu? Are you trying to keep it original? If not, I say pull off the good one and swap on a pair from SkiDIM. You can enlongate the holes on the pitot itself so you dont have to drill any new holes in the boat.
-------------
|
Posted By: Riley
Date Posted: January-19-2011 at 12:59pm
That's a good idea. I think we can deviate from its origonality with the pitot tubes. That doesn't seem to be an issue with the Malibu Fans. I didn't realize the pitot could be altered to fit the holes on the boat. Thanks for the idea.
-------------
|
Posted By: Donald80SN
Date Posted: January-21-2011 at 12:20am
Tim,
Sounds like you are covered, but I see all types on E-Bay under a Airguide search. They are usually with a older Air and Sea Speedo, but those sell for reasonable price.
I hope this helps,
Donald
|
|