need perfect pass help
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2060
Printed Date: November-22-2024 at 12:19am
Topic: need perfect pass help
Posted By: Kenny Wesley
Subject: need perfect pass help
Date Posted: July-13-2005 at 3:30pm
Does anyone have a source for rebuilding the servo unit or anyone have a used one for sale?
Mine has siezed up, perfect pass says buy a new one.
-------------
Kenny
|
Replies:
Posted By: Guests
Date Posted: August-18-2005 at 12:22am
If you can get the four Phillips head screws out of the motor without twisting them off, you're on your way to repairing it. Make sure you have a proper fitting screwdriver before you try. Maybe put some penetrant on the threads at the other end of the motor and let it soak in for a couple of days.
Once you get the end cover off the motor, press out the armature, then clean the corrosion off the stator magnets and the armature with a nonmagnetic wire brush. (I use a brass brush that looks like a big toothbrush)
Blow out with high pressure air if possible. Your problem was caused by the motor getting wet, be it from condensation or otherwise.
Art
|
Posted By: markski
Date Posted: September-29-2005 at 8:25pm
i have a complete 01 perfect pass for sale $400
Mark Prendeville 518-623-3235 Wakeboard Pro model
|
|