chevy manifolds?
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=20687
Printed Date: November-18-2024 at 2:17pm
Topic: chevy manifolds?
Posted By: phatsat67
Subject: chevy manifolds?
Date Posted: February-18-2011 at 4:43pm
| The G wood manifolds we have are to wide for our motor box and we just started working on the skylark again. I would like to find a set of any type of exhaust manifolds that will fit under a 78 sn engine box. Let me know if anyone has any. Thanks! |
Replies:
Posted By: boat dr
Date Posted: February-21-2011 at 12:41am
|
I have a set of SBC in good shape. They are the log type off a OMC 5.7 Boat dr ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: Fl Inboards
Date Posted: February-21-2011 at 10:25am
|
I have a nice set of used PCM SBC Manifolds and risors. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: phatsat67
Date Posted: February-23-2011 at 1:33pm
|
What are you both thinking price wise? zapritchett@gmail.com
thanks fellas |
Posted By: TRBenj
Date Posted: February-23-2011 at 1:46pm
|
Do you have a picture of the Glenwoods you installed? Im very surprised they dont fit under the SN motorbox. ------------- |
Posted By: boat dr
Date Posted: February-23-2011 at 4:42pm
Just bolt on the Glenwoods, Timmy says they should fit....  ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: TRBenj
Date Posted: February-23-2011 at 4:59pm
Did I say that? I said Im surprised they dont because that Ski Nautique motorbox is pretty wide. Im curious what style he tried, I dont know if theyre different than the other Chevy Glenwoods Ive seen. Is learning something from his trial and error allowed? ------------- |
boat dr wrote:Posted By: boat dr
Date Posted: February-23-2011 at 5:24pm
|
Never mind Timmy............It's all about you ....
The post was pretty plain, Glenwoods will not work. motor box will not fit. Why not help him find the parts he was searching for, rather than advice from your camp. ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: TRBenj
Date Posted: February-23-2011 at 5:44pm
Zach, if youre Glenwoods are the swoopy logs like this, it would be a shame not to use them.
Have you considered widening your motorbox to fit them? A few people here have had to do that to accomodate wider exhaust manifolds. Alternatively, I do not think these http://cgi.ebay.com/ebaymotors/PCM-Marine-Engine-Exhaust-Manifolds-AND-EXHAUST-RISERS-_W0QQcmdZViewItemQQhashZitem43a5265b23QQitemZ290533563171QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear - PCM manifolds sold on ebay. The price looked pretty reasonable, so it may be worth contacting the seller to see if theyre still available. Its worth noting that the risers appear to be the 3.5" ID style, not sure what size hose youre trying to match up to. ------------- |
Posted By: Fl Inboards
Date Posted: February-23-2011 at 5:54pm
|
I am thinking $200.00 for the manifolds (pair). The risors are new 3.5" short style (current) will take $150.00 for them. If you need the 3" long style I will sell you new ones for $95.00 Each.
Or will trade you straight up for your Glenwood logs for my manifolds. And sell you two for one on the risors. Plus shipping. eight five O two one five one nine nine six ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Hollywood
Date Posted: February-23-2011 at 6:50pm
 ------------- |
Posted By: phatsat67
Date Posted: February-24-2011 at 2:31pm
|
Haha thanks guys dad measured them and said they wouldn't fit he freaks about stuff sometimes so I will probably hang them and try to lower the box over The motor on the stand. I want to use them because of the look and flow potential. They are just like those but they don't have the 45 degree riser on the rear mine are just straight .were getting very close to dropping it in. The motor box is also out of a 78.
Also this is my first post from class on a smart phone ha. |