sanding
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=20691
Printed Date: November-20-2024 at 6:32am
Topic: sanding
Posted By: lakedog55
Subject: sanding
Date Posted: February-18-2011 at 9:15pm
Hi,
Which grit paper do you guys recomend for the area around the secondary stringers that is already free of bilge spray? Do you have to get all the bilge coating off to refiberglass. The ski pylon still will not come out. Anyway making progress
Post some pictures when it starts coming back together.
Mike
------------- Lakedog55
|
Replies:
Posted By: Keeganino
Date Posted: February-18-2011 at 11:55pm
Do you have pictures of the pylon and what is giving you trouble? You want to remove all of the gelcoat in the bilge and bond directly to the glass. Around the secondaries you dont have to grind much. It should already be bare glass. Again pics would really help to see what your talking about.
------------- "working on these old boats may not be cost effective but as it shows its what it brings into your life that matters" -Roger
http://www.correctcraftfan.com/diaries/details.asp?ID=4897" rel="nofollow - 1973 Skier
|
Posted By: 8122pbrainard
Date Posted: February-19-2011 at 10:02am
Mike,
Keegan's correct that you should see some glass especially around the mains. Just go after it with a 36 disc in the right angle.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
|