312 side draft intake
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2078
Printed Date: November-22-2024 at 12:56am
Topic: 312 side draft intake
Posted By: 67nautique312
Subject: 312 side draft intake
Date Posted: July-15-2005 at 1:51pm
|
I have a intake off of my 63 classic 312 ford that is for sale. This intake is the factory setup in the 63 312 interceptor with the 2-2 barrel side draft carbs.Both carbs have been rebuilt and intake was glass beaded and clear coated. You can see this boat in the diaries with the motor cover off so you can see the setup. I replaced this intake with different intake and four barrel for more HP/performance. e-mail me if your interested? ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Replies:
Posted By: Hammer
Date Posted: September-17-2005 at 12:40pm
|
Is this intake still available & how much do you want for it? ------------- Hammer |
Posted By: stang72
Date Posted: September-19-2005 at 3:46am
|
Paul...how's that thing running?
The 62 we bought last summer is almost done(machine shop is busy and I am not high priority...and the owner is a friend  )
We are thinking of switching intakes and running a holley...how's that switch working out for you? ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: Hammer
Date Posted: November-08-2005 at 4:03pm
------------- Hammer |
67nautique312 wrote:Posted By: Hammer
Date Posted: November-08-2005 at 4:06pm
Any chance that you still have this intake? What kind of intake & carb. did you replaced this with? ------------- Hammer |
Posted By: 67nautique312
Date Posted: November-11-2005 at 2:20pm
|
Hammer,
Sorry for not responding to ya!! Yes i do have the intake still, It fits a 292/312 intake. Its called a side draft and it has two 2 barrel carter carbs. It was factory on my 312 interceptor and both of the carter carbs. have been completly rebuilt and intake glass beaded and clear coated. If your interested i can e-mail you some pics. of the intake. I stopped using it because not real familiar with carter carbs and adjustments. Paul, ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Posted By: 67nautique312
Date Posted: November-11-2005 at 2:45pm
Hey Gary Whats up? ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |
Posted By: stang72
Date Posted: November-11-2005 at 11:07pm
Whats up is...I think you have a picture you should be sharing with eveyone Thats whats up!
Hammer ....sorry about the delay on photos...been way to busy with work stuff  Will get on the stick though. Also....the shop manual is copied and I will send it this week ( I do have your address). Paul do you want a copy...312 shop manual...good manual!
Paul...POST THE PICTURE....it is...well..hmmm. should I say quite a sight! Motivational to say the least! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: Munday
Date Posted: November-14-2005 at 7:41pm
|
Do you still have?
How much? I have this set up on 61 Arenacraft cool old boat,fins like 58 impala any way can you tell me how much addittional height is required to you the change as you did.this boat is V drive runabout full hatch over motor,always wondered if i could? My carbs are a pain and cold starts is a drag with side drafts Thanks Munday |
Posted By: 67nautique312
Date Posted: December-16-2005 at 12:23pm
|
Munday,
On my Boat it took an extra 4" with the hood scoop motor cover that already has extra height underneath. I made my motor cover base out of 2 by 4 boards, Braced and Fiberglassed it, bondo filled, sanded & painted it to make it look factory like. Turned out pretty good. Paul, ------------- 1963 Classic (handed down to my daughter) 67 Riviera 68 barracuda 1971 Ski Nautique Promo 86 Silver Nautique 1995 Ski Nautique |