Print Page | Close Window

Broke of 3 inch 1/4 rubber tubing in v-drive

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=20782
Printed Date: November-20-2024 at 6:44am


Topic: Broke of 3 inch 1/4 rubber tubing in v-drive
Posted By: TheBull
Subject: Broke of 3 inch 1/4 rubber tubing in v-drive
Date Posted: March-01-2011 at 1:56pm
2007 San 220 So this evening me and my buddy we'll call him j are finishing ups one maintenance to my boat. We had just finished replacing the two slow leaky tires and finished changing the engine oil, and decided since I had the new drill oil extractor I would change the v drive and trans. Well we get it going and switch from the starboard to port v drive oil fill hole. After failing to gain prime I attempt to pull it out but it's stuck. Well j wants to fiddle with it and just yanks it out with brute force. I really was shocked. No good my initial thoughts and I was right. He left 3 inches sliced off in my v-drive. I believe it's pretty far in there. I really am at a loss for words on this one. This I fear will take a month at least to fix if I take it to the shop and 1500+ dollars. Am I wrong? Can I pull the v dive mysElf easily? Well any help would be appreciated,

thanks

RW111


-------------
Super air 220



Print Page | Close Window