Ford motor Parts!
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=20999
Printed Date: November-20-2024 at 4:24am
Topic: Ford motor Parts!
Posted By: Fl Inboards
Subject: Ford motor Parts!
Date Posted: March-21-2011 at 3:08pm
|
OK Spring is here Bi-yearly shop clean out sale. Many Ford engine componets for sale. Will be at the river run this weekend so if anyone wants any of this stuf let me know I can bring it with me.
Two fresh sets of GT-40 heads. one set straight out of the machine shop the other with less than one hour run time since re-con. $500.00 a pair Set of standard HP Ford heads fresh out of the Machine shop $350.00. Performance custom ground cam for reverse rotation (right hand)$100.00 Eddlebrock performer intake manifold used, very nice bead blasted $100.00. New in the box Crane #44390 left hand camshaft 302-351-w $140.00 Two very nice stock cast iron intake manifolds $75.00 ea two very nice oil pans one with windage tray other older. $100.00 for windage, $75 for the other. Right hand electronic distributor $125.00 Very nice one piece seal right hand crank shaft $200.00 Many other Ford Small block motor componets two many to list now, you need it we may have it. Getting out of the ford World will consider offers on this stuff. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Replies:
Posted By: TRBenj
Date Posted: March-21-2011 at 3:16pm
|
Jody, is that distributor for a 302 or 351w? Mallory? ------------- |
Posted By: boat dr
Date Posted: March-21-2011 at 4:25pm
|
Jody, sounds like "swappin stuff " to me. I gotta a "flatty" that needs a new home, that will give me extra room in the Toy Shed.... ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: cocowoo
Date Posted: March-27-2011 at 5:02am
Posted By: Got Tiques
Date Posted: March-27-2011 at 3:32pm
|
Jody,
I'm interested in one pair of the GT 40 heads, the Edelbrock Performer intake, and the Performance RH cam. I have a stock 1990 Ski with the 351 PCM 240 HP, and would like to upgrade/increase HP to the 315 range. Please provide any additional info on this equipment to meet my goals. Are the heads the GT 40 P heads with brass plugs and drilled for the 351 headbolts?? I believe the Performer intake height will fit my motor box without mods?? Also what is the condition of the cam and what is the grind?? What was it set up for and how was it broken in?? I'm ready to buy and upgrade and am checking for compatibility with TR Benj (nephew Tim). Can you guess at packaging/shipping costs to Scotia, NY 12302?? You are probably at SJRR now but you can call me at my office during weekday workhours 518-884-3603. Thanks, Todd Benjamin |
Posted By: horkn
Date Posted: March-28-2011 at 11:34pm
|
Do you happen to have a new bi directional water pump for a 351W?
LMK if you do. Thanks, Tom horkn3875 at yahoo dot com ------------- 78 martinique- refloored, reinforced, stringers re glassed, re engineered interior GT40P heads Edelbrock Performer intake acme 4 blade http://img.photobucket.com/albums/v64/horkn/fish/nautique.jpg |
Posted By: Got Tiques
Date Posted: March-29-2011 at 11:29pm
|
Jody, Sorry I missed your call today. I am really trying to find a pair of GT40"P" heads, so I'll keep looking. I'll let you know if I need any of your parts asap, but right now, thanks, Todd |
Posted By: sam57
Date Posted: March-30-2011 at 1:56pm
|
Re the left hand crane cam. Would that be a stock or high pro cam? Roller or flat tappet? 13726548 firing order? Please answer via; sam5744720@yahoo.com
Sam57 |
Posted By: Fl Inboards
Date Posted: March-30-2011 at 2:05pm
Todd No worries. Their are Four sets on Evil pay (E-bay)right now ranging from $100-$250. They still will need reconditioned and the bolt holes opened up to work with the 351. Will work a package deal with anyone that wants heads,intake and camshaft! $500 plus the bus ticket.. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Got Tiques wrote:Posted By: TRBenj
Date Posted: March-30-2011 at 7:08pm
|
Jody, any information on that distributor? Looking for something for a RH 302, ideally- but could swap gears if necessary. ------------- |
Posted By: Fl Inboards
Date Posted: March-31-2011 at 12:30pm
|
Sorry no do not have a 302 dist I have a right hand 351-w prestalite electronic that is in great shape. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: TRBenj
Date Posted: March-31-2011 at 12:32pm
|
Gotcha, thanks. If you come across a nice 302 dist (LH or RH works, I can swap the gear) then let me know! ------------- |
Posted By: jcow0714
Date Posted: March-31-2011 at 5:13pm
| i need a distributor, alternator, and carb for a ford 351. from an 82, 2001. let me know what you have or if you know where i can get them. thanks |
Posted By: 79TiqueRebuild
Date Posted: March-31-2011 at 8:36pm
|
Hi Jody, Just a follow up to the message I left earlier this week on Florida Inbooards inc. I want the distributor for the 351 rh. I realize you must be busy catching up after the SJRR it look like a great time from the pictures. Thanks, Monty |
Posted By: 62 wood
Date Posted: April-01-2011 at 1:17am
Jcow, I have a Southwind I'm going to part. I think it is a 351, cracked block ... carb is missing, can check to see on other parts. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: jcow0714
Date Posted: April-01-2011 at 12:03pm
| 62wood if you are parting one out and the parts are good, send me some prices. |
Posted By: Fl Inboards
Date Posted: April-01-2011 at 12:19pm
I have all three you are looking for. I have a nice rebuildable 4160 holley core carb a right hand 351 distributor and a alternator that will work on your 82. Phone. 850 215 1996. can get it out Monday. Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: April-01-2011 at 12:24pm
Wow! Do me a favors and start your own thred Thanks!! or send A PM seems that would be the right thing to do! 
Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: 62 wood
Date Posted: April-01-2011 at 12:35pm
Jody, sorry for the hijack , I tried a PM, jcow has no contact info in his profile.. just trying to help the guy out..I AM sorry shouldnt have offered... ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: Fl Inboards
Date Posted: April-01-2011 at 5:54pm
|
Distributor Sold !
Still have a boat load of Ford parts and componets to build up a very nice motor. Every thing Ford must Go as it is taking up good GM space!! LOL!!! ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: boat dr
Date Posted: April-01-2011 at 6:13pm
|
Jody , I sent you pics of the flatty , did you got them? ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: Andy
Date Posted: April-03-2011 at 3:54am
|
Jody, sorry I haven't gottne back to you yet. Been a madhouse around here suddenly. I didn't know you were a flatty guy. Is that Ford flavored? I have a few of em. And some misc parts. I'll call you Mon. Thanks! ------------- http://correctcraftfan.com/diaries/details.asp?ID=3721&sort=&pagenum=6&yrstart=1982&yrend=1982" rel="nofollow - My Blue 82 SOLD! |
Posted By: boat dr
Date Posted: April-03-2011 at 12:01pm
|
Andy, I gotta bunch of flatty stuff, complete running 17 foot 1973 Rayson Craft. Gave Jody first shot, seems all I have is junk and his stuff is gold.
Make me an offer...................... ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: Fl Inboards
Date Posted: April-03-2011 at 12:26pm
|
What the heck are you talking about???
Billy you jumping off the deep end? I asked what you wanted for the boat on the phone and you never gave me an answer, I have a crap load of real nice 351 stuff for trade as per you and you did not want money, I thought your flat was trading material!! You are right though the boat is rather rough but is a survivor and would make for a real nice flat . Do your self a favor before you loose it and do some research on the Rayson. It is a run of the mill ski model Not a LP and not a GN, while you are fumming here are couple of sites you can chase down the worth of the boat: www.v-driveboat.com and www.raysoncraftresources.com, also try this site http://www.dragboatcity.com/boats-sale/index.html- 4 rayson here for sale all turn key and less than 7K. Their is a very - very nice LP on E-bay right now for 8K take a look and let me know what you think your jewell is worth. Cheers! Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: April-03-2011 at 2:47pm
Yea I own the first boat I learned to ski behind and it is a 65 Ricshaw (looks like a Howard)Flatbottom V-drive. We currently also have two other flats including A RaysonCraft LP and a Glen-L Tornado. Sorry I stay away from the Blue oval in my performance boats they are too expensive as it is! BBC and SBC stuff are a dime a dozen. Will be in the shop all day Monday Will also provide a complete list of SBF ford stuff that has got to go on Monday ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: sam57
Date Posted: April-03-2011 at 10:24pm
|
Jody,
I asked about the Crane cam and you haven't got back to me. Is it sold or are you busy? Sam |
Posted By: Fl Inboards
Date Posted: April-04-2011 at 11:03am
|
Sorry sam,
Still available, yes you did ask but did not send a return e-mail address only CCF Call me I will pull the grind sheet from the box and give you any of the info you want! Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: sam57
Date Posted: April-04-2011 at 12:22pm
|
Jody,
The grind sheet info wouldn't mean anything to me. The Crane # in your listing (44390)is not a good #. The correct # will tell me everything I need to know. Sam email: sam5744720@yahoo.com |
Posted By: WOFTAM
Date Posted: April-05-2011 at 12:18pm
What is that one worth to you? ------------- Just because you can does not mean you should. |
Posted By: Fl Inboards
Date Posted: April-05-2011 at 1:06pm
|
Sam the grind # is H-260-2 Replaces HMV-260-2 The number I listed is the part #
The 351 RR Dist is sold! ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: sam57
Date Posted: April-05-2011 at 9:15pm
|
Jody,
OK, found it, it's the one I need. You had one number missing, 443902. Does it have the lifters with it? Sam |
Posted By: Fl Inboards
Date Posted: April-05-2011 at 9:25pm
|
Sorry Sam no it was not a cam and lifter set just the cam.
I got it from Northern Auto on a close out when Crane went out of busines. I am selling it for what I paid for it. Thanks. Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: sam57
Date Posted: April-06-2011 at 1:09pm
|
Jody,
Crane must be back in business, I've talked to them on the phone. $140 is what they are selling them for. Sam |
Posted By: Fl Inboards
Date Posted: April-06-2011 at 1:26pm
|
http://www.autoweek.com/article/20090225/carnews/902259979
I was shocked to when i read that Crane had gone out of business how ever they may have been bought out and are back in business. Like I said this was a close out from Norther Auto parts a little more than a year ago. $140.00 plus shipping, best I can do! Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Gary S
Date Posted: April-06-2011 at 3:21pm
|
http://www.sscycle.com/email/display.php?List=40&N=356 - Crane cams ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Fl Inboards
Date Posted: April-06-2011 at 4:50pm
|
Old Ford Stock liquidation New and used Parts. 351-w/GT-40
1. Pair GT-40 heads re-conditioned complete w/brass freeze plugs $400.00 "SOLD" 2. Pair Gt-40 Heads Re-conditioned complete $500.00 "SOLD" 3. Pair Standard HP heads re-conditioned complete $300.00 "SOLD" 4. Cast Iron 4BBL intake manifold $35.00 "SOLD" 5. 8, .30 over hyperputic pistons 9.0:1 on sized rods $200.00 6. Right hand performance ground cam shaft with lifters 1 hr run time $200.00 "SOLD" 7. Edelbrock intake manifold used/bead blasted $100.00 "SOLD" 8. Right hand crankshaft $100.00 1 piece seal 9. Left hand crank shaft $100.00 1 piece seal 10. Bell housing $75.00 11. New bell housing $200.00 12. 2 sets of pully’s $35.00 per set (upper and lower) 13. 3 harmonic balalncer’s $20 ea 14. R139006 Gear, starter ring 157 teeth “new” $98.00 15. Flywheel complete with new starter ring gear $145.00 16. 2 used Fly wheels $25 ea 17. 3 timing chain covers “NLA” from PCM $100.00 ea 18. 2 complete upper/lower thermostat housings $40.00 ea 19. 1 J-tube with new hoses and clamps $40.00 20. 1 “Chrome” upper thermostat housing $75.00 "SOLD" 21. 2 sets reduction motor mounts $20.00 per set 22. Many misc throttle brackets and engine hardware. Geting out of the Ford Business everything will go, make me a decent offer and you might be suprised what you can get! ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: April-14-2011 at 2:55pm
|
This stuff is starting to filter onto E-bay all gonna be out of the shop by the end of the month either by the scrap yard or parts.
Also if their is any interest I have a customer wanting to re-power his 95 and has a 351 RR Carb motor Only for sale. It is a 1:1 package (scrappy). Motor has GT-40 heads and seems to be prety clean, runs well. make offer! ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: anthonylizardi
Date Posted: April-14-2011 at 4:07pm
| Jody, I sent you an offer for the heads and intake. |
Posted By: NC_Tique
Date Posted: April-26-2011 at 12:38am
| Email Sent |
Posted By: Fl Inboards
Date Posted: April-26-2011 at 10:46am
Yes you did but you left no way of getting back to you. Both cams are available and are flat tappet. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: NC_Tique
Date Posted: April-26-2011 at 10:39pm
|
I'll take the custom....still new to this type of forum.
I will send you another email with more info. |
Posted By: TX Wind
Date Posted: April-28-2011 at 3:22pm
|
Jody,
Do you have any Ford FE parts by chance? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5622" rel="nofollow - 1967 SN Interceptor 1985 |
Posted By: Fl Inboards
Date Posted: April-28-2011 at 3:29pm
|
Sorry No FE parts. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: TX Wind
Date Posted: April-28-2011 at 3:38pm
|
Darn. You wouldn't be interested in a Velvet Drive with only 10 hours on it with a bellhousing and damper for a 350 would ya? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5622" rel="nofollow - 1967 SN Interceptor 1985 |
Posted By: boat dr
Date Posted: April-28-2011 at 6:48pm
|
TX, If Jody passes let the Boar Dr. know, I may need one for the Starflite..........Boat dr ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: TX Wind
Date Posted: April-28-2011 at 6:53pm
|
Doc, it's open to anyone and posted on the parts site. Peddlin my stuff just like Jody. So first come first served. I need to move it and I have a good price on it for a 10 hour tranny. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5622" rel="nofollow - 1967 SN Interceptor 1985 |
Posted By: boat dr
Date Posted: April-28-2011 at 6:58pm
|
Jeff, give me a call, lets have a go.........Billy ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: TX Wind
Date Posted: April-28-2011 at 7:26pm
|
I would need a number for ya Billy ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5622" rel="nofollow - 1967 SN Interceptor 1985 |
Posted By: Fl Inboards
Date Posted: April-28-2011 at 7:30pm
Thanks for the offer. I just got one back rebuilt from Art to have in the store. But thanks again. Most of the stuff on my list has gone away on e-bay. I do have many misc ford marinized small parts left that I did not list this go around but will take inventoory and post what I have, again I am getting completly out of the Ford parts storage and making room for the Bow tie stuff. Thanks! Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: TX Wind
Date Posted: April-28-2011 at 7:53pm
|
Thanks for letting everyone know it's open Jody. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5622" rel="nofollow - 1967 SN Interceptor 1985 |
Posted By: abareskier
Date Posted: May-04-2011 at 6:50am
|
I am looking for a pcm pro boss gt40 block and heads. Can you help me?
Smith marine here says block is cracked and pcm has not used fords for about ten years. Is that true? I recently bought a 97 sn from a guy in texas. |
Posted By: Fl Inboards
Date Posted: May-04-2011 at 12:35pm
|
I have a nice set of GT-40 heads that have been re-conditioned.
Also a complete pull out Bob tail 5.0/HO EFI Chevy Motor ready to drop in where the Ford went. It came out of a 2001 SN (year model). Very Nice motor. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: TX Wind
Date Posted: May-04-2011 at 12:53pm
|
"Only one thing can beat cubic inches! And that is cubic Dollars!"
LOL...Jody, is that 5.0 the cubic Dollars side of that....sorry couldn't resist. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=5622" rel="nofollow - 1967 SN Interceptor 1985 |