1983 SN Parts for sale
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=21212
Printed Date: June-24-2024 at 9:25am
Topic: 1983 SN Parts for sale
Posted By: TimSpangler
Subject: 1983 SN Parts for sale
Date Posted: April-08-2011 at 5:38pm
|
****UPDATED LIST 8/22*****
https://picasaweb.google.com/tim.spangler/BoatPartsForSale?authkey=Gv1sRgCMTpjPGrwdrGaQ&feat=directlink - >Pics Here< I have lots of parts for sale. Here is the list, if you don't see something just ask I may have it. Make me an offer. I do have pics for most everything, just ask. *NO TRAILER* GONE - 1983 SN 2001 Hull (BARE, cracked on the bottom at strut) SOLD - 351W (630 hrs) runs, needs carb. & starter (I have had this running)(1982) SOLD - BW 1:1 trans (1982) NO REVERSE SOLD - Teak platform(cleaned and 1 coat of oil on end grains) -has (2) small pieces broken off at transom corners SOLD - Platform Brackets (Full Set) SOLD - (1) 3 blade props STOCK JUST TUNED SOLD - (2) Tracking fins SOLD - (1) Speedometer (other is gone) SOLD - All gauges (except hr. meter) SOLD - Rudder (complete) and linkage STILL HAVE THE LINKAGE SOLD - Steering wheel SOLD - Morse MV-1 control w/ cables SOLD - Rear view mirror with brackets and knobs SOLD - Bow Vents Stern Vents Rub rail end cap Gas Tank and fill SOLD - (2) Mufflers and exhaust hose SOLD - (2) SS Bow Rails (2) SS Gunnel Rails SOLD - Wiring Harness SOLD - Cig. Lighter SOLD - Mufflers SOLD - Engine/Trans Mounts SOLD - Windshield Frame SOLD - Pylon SOLD - Cradle SOLD - Dash Switches SOLD - Battery Box Cover SOLD - 3" Through hull exhaust ports SOLD - Stuffing Box Lifting Rings Bow Light Stern Light Socket There may be some things that I am missing, but I think that is everything. Thanks TIM |
Replies:
Posted By: TRBenj
Date Posted: April-08-2011 at 5:40pm
|
Got the pylon?
How much do you want for the tranny? Any other motor parts? Carb, distributor, etc? ------------- |
Posted By: TimSpangler
Date Posted: April-08-2011 at 5:42pm
| Yeah, no ring. |
Posted By: TRBenj
Date Posted: April-08-2011 at 5:43pm
|
Shoot me an email: TRBenj@gmail.com ------------- |
Posted By: dwcar
Date Posted: April-08-2011 at 11:22pm
|
what about the cigarette lighter. ------------- 83Ski |
Posted By: davidg
Date Posted: April-08-2011 at 11:31pm
|
I am interested in the mufflers. How much are you asking for them? Please email me at dgwinn390@hotmail.com.
Thanks! |
Posted By: TimSpangler
Date Posted: April-09-2011 at 12:04am
|
I got the lighter, make me an offer.
|
Posted By: TimSpangler
Date Posted: April-09-2011 at 12:07am
| Mufflers &50 plus shipping for the pair? let me know if I've lost my marbles, not really sure what they should sell for. I saw the new one at 115 each. |
Posted By: Pauly-Banana
Date Posted: April-09-2011 at 12:31am
|
How much for the rear seating and observers seat? ------------- mailto:mrfurymn.8124@yahoo.com" rel="nofollow - Pauly-Banana http://www.correctcraftfan.com/diaries/details.asp?ID=4102&yrstart=1981&yrend=1985" rel="nofollow - My 1983 Nautique <b |
Posted By: turk
Date Posted: April-09-2011 at 12:37am
|
Tim, am interested in all seats. Can you send pictures? Thanks, Turk. ------------- 1982 Ski Nautique 1983 Ski Nautique |
Posted By: davidg
Date Posted: April-09-2011 at 1:25am
Sounds fair. Can you send me an email to let me know where to send a check or give me your paypal account. I can give you my address as well. |
TimSpangler wrote:Posted By: Gary S
Date Posted: April-09-2011 at 1:30am
|
Psst- Dave don't tell anyone your putting on mufflers--- ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: mslitti
Date Posted: April-09-2011 at 1:57am
| Can you shoot me a email, looking for the engine mslitti@comcast.net |
Posted By: ky82sn
Date Posted: April-09-2011 at 2:23am
|
Tim
what are you asking for the fins? sycamoreranch@aol.com ------------- 1982 ski nautique 1966 Al Tyll Skier |
Posted By: davidg
Date Posted: April-09-2011 at 2:42am
Whats that again Gary?? I can't hear you! |
Posted By: 8122pbrainard
Date Posted: April-09-2011 at 10:41am
Gary, The mufflers are cheaper than a bow rider - gotta make the wife happy! 
It will also quite it down so he can hear the tubers he's pulling!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: TimSpangler
Date Posted: April-09-2011 at 11:41am
|
How about 500 for the seats? If that's not fair let me know
Here is a link to the pictures. https://picasaweb.google.com/tim.spangler/BoatPartsForSale?authkey=Gv1sRgCMTpjPGrwdrGaQ&feat=directlink - >Pics Here< |
Posted By: TimSpangler
Date Posted: April-09-2011 at 12:02pm
|
DAVIDG shoot me your email.
tim.spangler@gmail.com |
Posted By: dwcar
Date Posted: April-09-2011 at 12:04pm
|
Tim,
Can you send me a picture of the cigarette lighter. dwcar@yahoo.com ------------- 83Ski |
Posted By: Pauly-Banana
Date Posted: April-09-2011 at 1:52pm
|
Tim,
What would you take for the swim platform brackets plus shipping Shoot me an email at: skierox@hotmail.com ------------- mailto:mrfurymn.8124@yahoo.com" rel="nofollow - Pauly-Banana http://www.correctcraftfan.com/diaries/details.asp?ID=4102&yrstart=1981&yrend=1985" rel="nofollow - My 1983 Nautique <b |
Posted By: bkhallpass
Date Posted: April-09-2011 at 2:33pm
|
Do you have the black plastic vent that goes in the transom, and if so, is there any damage to it? Thx, BKH ------------- Livin' the Dream |
Posted By: TimSpangler
Date Posted: April-09-2011 at 2:39pm
| Yes I have them. They are in great shape no damage. $35 for them +shipping? |
Posted By: lbrashea
Date Posted: April-09-2011 at 10:33pm
| Looking for waterpump, the on that is an impeller, also how much for the boat hull, do you have the title?? Louisbrashear@yahoo.com |
Posted By: gun-driver
Date Posted: April-09-2011 at 10:39pm
|
If Paul doesn't take the platform I'd be very interested and can pick it up.
pheinbach@hotmail.com Also interested in the bow vents. Tim, After reading your avatar/boat bio. Did everything work out as you hoped??? Oh by the way you guys are like vultures. You guys will have this boat stripped to the bone in hours. |
Posted By: Pauly-Banana
Date Posted: April-10-2011 at 1:27am
|
Hello Guys,
Only interested in the brackets to support the swim platform, not the actual teak swim platform. So no problem gun-driver. ------------- mailto:mrfurymn.8124@yahoo.com" rel="nofollow - Pauly-Banana http://www.correctcraftfan.com/diaries/details.asp?ID=4102&yrstart=1981&yrend=1985" rel="nofollow - My 1983 Nautique <b |
Posted By: gun-driver
Date Posted: April-10-2011 at 1:46am
|
Cool I don't need the brackets
Tim, Can you shoot me a pic and how much you may want for the platform itself. |
Posted By: jbear
Date Posted: April-10-2011 at 3:41am
don't I remember you bragging how nice and quiet and easy to hear in the back seat yours is now? john ------------- "Loud pipes save lives" AdamT sez "I'm Canadian and a beaver lover myself"... |
Posted By: bbishop1974
Date Posted: April-10-2011 at 11:16am
| hi tim,i have a 86',iam looking for the hinge assembly for observers seat back.if you could post a pic that would be great.mine is aluminum with 2 springs.dont know if they had them in 83.i would be interested in tracking fin also.bbishop1974@hotmail.com,thanks. |
Posted By: davidg
Date Posted: April-10-2011 at 2:15pm
Good one JBear! AND, don't I seem to remember a certain Mustang that resides just down the river from me which had brand spanking new mufflers on it in which the owner (who shall remain nameless) told me where I could get those exact same mufflers. I just want to be able to hear Pete screaming from the tube....."Slow Down Dave....YOUR GOING TO FAST", when we tube together up on Delavan.
|
Posted By: Gary S
Date Posted: April-10-2011 at 4:45pm
|
What? couldn't hear ya my ears are still ringing ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: jbear
Date Posted: April-11-2011 at 2:40am
You and Gary are on the same river? Well..his boat is so quiet now you'll only know when he is coming if he calls you on the cell phone. john ------------- "Loud pipes save lives" AdamT sez "I'm Canadian and a beaver lover myself"... |
Posted By: Gary S
Date Posted: April-11-2011 at 3:11am
|
Yes we are John,he's the next town up on the river and chain of lakes. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: jbear
Date Posted: April-11-2011 at 3:18am
|
did you know of him or his boat before he got on here? Sure is a nice lookin' ride.
john ------------- "Loud pipes save lives" AdamT sez "I'm Canadian and a beaver lover myself"... |
Posted By: TimSpangler
Date Posted: April-11-2011 at 10:27am
The engine is still together. I plan to keep it that way unless there is no one interested in the complete engine (which there is as of right now) As for the hull itself. Shoot me an email and we can discuss it. tim.spangler@gmail.com I will keep you posted on the engine. Thanks |
Posted By: TimSpangler
Date Posted: April-11-2011 at 10:33am
I think Pauly is interested in the brackets only? The platform may still be available. I do still have the bow vents. Shoot me an email. tim.spangler@gmail.com As for everything working out......I'll let you know, so far so good.
|
Posted By: ky82sn
Date Posted: April-12-2011 at 5:25pm
|
Tim,
Sent you an email about 2 of the three fins? Let me know. Thanks, JT ------------- 1982 ski nautique 1966 Al Tyll Skier |
Posted By: Pauly-Banana
Date Posted: April-13-2011 at 12:53am
|
That is correct on the swim platform. I am only interested in the brackets, NOT the teak wood platform. I hope to use the brackets to replace an ugly set on a 1973 Ski Nautique. I plan to measure this weekend to see if this will work.
Tim, thanks for your patience. ------------- mailto:mrfurymn.8124@yahoo.com" rel="nofollow - Pauly-Banana http://www.correctcraftfan.com/diaries/details.asp?ID=4102&yrstart=1981&yrend=1985" rel="nofollow - My 1983 Nautique <b |
Posted By: jcow0714
Date Posted: April-13-2011 at 4:29am
| do you have any engine mounts? |
Posted By: TimSpangler
Date Posted: April-13-2011 at 12:33pm
I do. Should be in good shape. $40 + shipping for all 4 w/ hardware Shoot me an email if you are interested. tim.spangler@gmail.com Thanks |
Posted By: bbishop1974
Date Posted: April-13-2011 at 11:49pm
| hi tim,sent you email regarding parts.thanks,brian |
Posted By: jcow0714
Date Posted: April-14-2011 at 4:46pm
| Tim il take the mounts if that a**hole didn't steal them from me. Send me an email at jcow0714@aol.com. Thanks |
Posted By: wingwrench
Date Posted: April-14-2011 at 5:49pm
If I had known you had dibs I would have walked or sent them to you, but that deal went out the door when you started the name calling. Next time try a civil conversation, it works wonders. |
Posted By: jcow0714
Date Posted: April-14-2011 at 6:40pm
| It just gets really annoying when you find parts online and numerous people chime in and take them. Total disrespect. But since I can't get them from you, does anyone else know where I can pick these up at? I need engine and trans. Thanks |
Posted By: dwcar
Date Posted: April-14-2011 at 8:21pm
|
Discount inboard marine sells them.
------------- 83Ski |
Posted By: KFD14
Date Posted: April-15-2011 at 4:53pm
|
I might be interested in the step pads. How much for the set??
Seth ------------- %20http://www.correctcraftfan.com/diaries/details.asp?ID=4380" rel="nofollow - 83 2001 SN |
Posted By: TimSpangler
Date Posted: April-16-2011 at 11:36am
Shoot me an email tim.spangler@gmail.com Thanks |
Posted By: Pauly-Banana
Date Posted: April-17-2011 at 1:39pm
|
Tim,
I took a good look at the brackets yestersday and have decided to pass on them. I would have to drill more holes. Thanks anyway! ------------- mailto:mrfurymn.8124@yahoo.com" rel="nofollow - Pauly-Banana http://www.correctcraftfan.com/diaries/details.asp?ID=4102&yrstart=1981&yrend=1985" rel="nofollow - My 1983 Nautique <b |
Posted By: ky82sn
Date Posted: April-17-2011 at 8:12pm
|
Tim,
Still need to get your mailing info. Jerry ------------- 1982 ski nautique 1966 Al Tyll Skier |
Posted By: Matt3Ark
Date Posted: April-18-2011 at 2:44am
|
How much do you want for the props? Also, do you have the in-dash console with lid still? What color, are any parts of lid or console broken? How much for it? My email is matt.3ark@gmail.com Thanks
|
Posted By: rman56
Date Posted: April-18-2011 at 11:55am
|
How much for the good prop and the rudder? Thanks
rdscroggin@cox.net ------------- 1983 Ski Nautique |
Posted By: Sjm78
Date Posted: April-18-2011 at 4:51pm
|
If rman56 decides not to take the Rudder I would like second chance.
Thanks Sjmother@comcast.net |
Posted By: jcow0714
Date Posted: April-20-2011 at 4:46am
| how about fuel line? |
Posted By: jcow0714
Date Posted: April-20-2011 at 4:46am
| how about fuel line? from the carb to fuel pump? |
Posted By: 84SN2001
Date Posted: April-25-2011 at 9:02am
| Is the stern light cover still there? Its the chrome cover that covers the housing for the stern light so that water wont get down down in the housing???? Some how mine is missing then my boat will be complete |
Posted By: 81 tique
Date Posted: April-25-2011 at 10:20pm
| I'd take the speedometer if it's an airguide surface mount. One of mine is bad on my 81 SN. Is the side glass the same on yours an the 81? If so I'm also looking for the rectangular glass piece. Thanks! |
Posted By: TimSpangler
Date Posted: April-26-2011 at 4:15pm
I have it. Shoot me an email. Thanks, TIM |
Posted By: TimSpangler
Date Posted: April-26-2011 at 4:15pm
Stern light is gone, sorry. TIM |
Posted By: TimSpangler
Date Posted: April-26-2011 at 4:17pm
I have 1 speedo left. Shoot me an email. Glass is gone. Thanks TIM |
Posted By: TimSpangler
Date Posted: April-26-2011 at 4:35pm
| Updated list on first page. |
Posted By: 81 tique
Date Posted: April-26-2011 at 6:00pm
| Tim, you can reach me at cbtdevelopment at comcast.net |
Posted By: 84SN2001
Date Posted: April-26-2011 at 9:21pm
| does the stern light socket still have the sliding chrome cover? If so I need it. thanks Brian |
Posted By: skicat2001
Date Posted: April-27-2011 at 12:04am
|
I need the parts for the driver seat. Screws brackets etc. How much?? What I have rigged is not working... Thanks ------------- 1985 CC 2001-SOLD Lee Michael Johnson |
Posted By: TimSpangler
Date Posted: April-27-2011 at 10:52am
I do have the entire light, as of right now there is interest in the part from another member. If they decide that they don't need the part I will give you next dibs. Thanks TIM |
Posted By: TimSpangler
Date Posted: April-27-2011 at 10:54am
The only parts I have for the drivers seat are the adjustment brackets and screws. I do not have the swivel base. Sheet me an email if you are interested and I can shoot you some pictures of what i have. Thanks TIM |
Posted By: baitfish
Date Posted: April-27-2011 at 4:18pm
|
81 tique,
I have the side glass that you may need. Shoot me an email and I will take some pictures tonight, and email them to you. tcoggins1@triad.rr.com Thanks, Tim (baitfish) ------------- Tim Coggins |
Posted By: dochockey
Date Posted: April-27-2011 at 5:33pm
|
Have you sold the boat? and is the list on the first page updated?
Kirk ------------- 1989 Teal Ski Nautique 1967 Mustang Harris Float Sunfish |
Posted By: TimSpangler
Date Posted: April-27-2011 at 5:36pm
|
Kirk - The list on the first page is up to date. No the boat hull is not sold.
TIM |
Posted By: dochockey
Date Posted: April-27-2011 at 5:52pm
|
Do you have any photos of the hull is it in bad shape ? ------------- 1989 Teal Ski Nautique 1967 Mustang Harris Float Sunfish |
Posted By: TimSpangler
Date Posted: April-27-2011 at 6:02pm
Here is a link to some pics of the boat before I bought it. You can see the crack on the bottom. https://picasaweb.google.com/tim.spangler/83Nautique?authkey=Gv1sRgCOqtnuHB3qLXKw&feat=directlink - Boat Pics I did start to grind down one side of the crack. It doesn't seem to go through, rather it went down about 3-4 layers and started to spread to the sides. If I had the space and the time, I would keep it and do a full stringer job and repair the crack. I'll let it go cheap! Make me an offer.
|
Posted By: dochockey
Date Posted: April-27-2011 at 6:16pm
|
Wow it looks like it got dropped? or hit something real good. I'm on the west side of Mi where are you? I like the color
------------- 1989 Teal Ski Nautique 1967 Mustang Harris Float Sunfish |
Posted By: TimSpangler
Date Posted: April-27-2011 at 6:42pm
| I am in south central PA. The gel was redone at some point, so it is in great shape. The graphics are flaking off. It should have the 3 stripes. I assume it was the 3 brown stripes judging by the interior. I was told it hit the something at Damn 4 in MD. I'm not familiar with that area. |
Posted By: jeffb4257
Date Posted: April-28-2011 at 1:00am
|
Hi, I'm interested in the seats and mirror. Please email me @ jbk2kash@hotmail.com if they're still available.
Thanks!! |
Posted By: skicat2001
Date Posted: April-29-2011 at 12:56am
Tim, Thanks for the reply my friend. Here is my email address skicat2001@yahoo.com or ljohnson@globalservices.net I would like to see what you have?? I have 2 holes in the rear plastic pieace that is under neath the seat and is not holding correctly. I lost a bolt somewhere for on of the front holes and the seat is starting to become loose. Any help would be great?? Thanks Tim Lee ------------- 1985 CC 2001-SOLD Lee Michael Johnson |
Posted By: skicat2001
Date Posted: April-29-2011 at 12:57am
|
ooopppss wrong first email
skicatjohnson2001@yahoo.com Now thats right ------------- 1985 CC 2001-SOLD Lee Michael Johnson |
Posted By: Quigs85SN2001
Date Posted: May-08-2011 at 1:31pm
|
Do you still have the mirror and brackets? I'm interested.
Brian peggybrian2@att.net ------------- Brian |
Posted By: Juiced2001
Date Posted: May-10-2011 at 2:34am
|
I'd like to purchase the mirror with brachets. Also the fuel filter housing assembly. Also if the cig lighter is available, I'll take it as well. How much for Speedometer? I'm also interested in the ignition switch and keys that go with it.
Thanks, |
Posted By: TimSpangler
Date Posted: May-10-2011 at 12:42pm
|
Most of those thing have already been sold. The only things I have left from your list are the Fuel filter and the ignition switch (I do not have any key for it). I still have the speedo but I have someone interested in it, if they are no longer interested then It will be back up for grabs.
Shoot me an email if you are interested in the remaining itmes. tim.spangler@gmail.com TIM |
Posted By: TimSpangler
Date Posted: May-10-2011 at 12:45pm
| **** 5/10/11 UPDATED FOR SALE LIST ON FIRST PAGE****** |
Posted By: Lollar
Date Posted: May-19-2011 at 11:52am
|
Interested in the Seats
Would they fit a 80 Ski Tique? Please email me david.lollar@gmail.com |
Posted By: first boat
Date Posted: May-31-2011 at 5:50pm
|
Tim,
I sent you an email about the engine. Thanks, Steve |
Posted By: PNALEWAJK
Date Posted: June-08-2011 at 8:27am
|
Hi,
You have listed "gunnel rails"..., Im looking for the vinal pads tha run along the gunnels. Do have them..? What condition are they..? Thanks ------------- Corvette Pete |
Posted By: TimSpangler
Date Posted: June-08-2011 at 10:54am
|
I am currently in the process of a sale of the interior (coaming pads included).
Sorry TIM |
Posted By: lank
Date Posted: June-08-2011 at 2:15pm
| Hi, Do you still have the platform brackets? If so do you have any pics? Please let me know. Thanks! Tim |
Posted By: TimSpangler
Date Posted: June-08-2011 at 3:37pm
|
Here is a link to the pic of the brackets
https://picasaweb.google.com/tim.spangler/BoatPartsForSale?authkey=Gv1sRgCMTpjPGrwdrGaQ&feat=directlink#5592608681531826178 - Brackets TIM |
Posted By: Air206
Date Posted: June-08-2011 at 4:13pm
|
Tim:
Did you get a bite on the Speedo? I'm def. interested...... nautiquexl at cox dot net Steve ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: C-Bass
Date Posted: June-08-2011 at 6:44pm
|
Late to the party. Tim, if Lank doesn't end up with the brackets, I'd like a shot at them.
Thanks, Craig ------------- Craig 67 SN 73 SN http://www.correctcraftfan.com/diaries/details.asp?ID=6103" rel="nofollow - 99 Sport 85SN |
Posted By: Tadpole
Date Posted: June-09-2011 at 11:26am
|
Hi Tim, I am interested in the speedometer. My email is sockfund@comcast.net. Thanks, Tadpole ------------- 1993 Ski Nautique |
Posted By: lank
Date Posted: June-09-2011 at 3:12pm
| Tim, I am going to pass on the brackets. Thanks for the info. It looks like Craig has an interest in them. Regards, Tim L. |
Posted By: TimSpangler
Date Posted: June-09-2011 at 3:26pm
|
Craig,
If you are interested shoot me an email tim dot spangler at gmail dot com Tim |
Posted By: C-Bass
Date Posted: June-10-2011 at 2:30pm
|
Sent you an email Tim. Did you get it? ------------- Craig 67 SN 73 SN http://www.correctcraftfan.com/diaries/details.asp?ID=6103" rel="nofollow - 99 Sport 85SN |
Posted By: mslitti
Date Posted: June-19-2011 at 2:42am
|
Tim I still want the Stern Light Socket
|
Posted By: Fibersport
Date Posted: June-19-2011 at 6:32pm
|
Tim,
I know this post is a bit old but do you still have the exhaust ports? If so I might be interested. Thanks, Greg century66@sbcglobal.net |
Posted By: TheChad1976
Date Posted: June-21-2011 at 3:37pm
| Hey Tim, would you be able to shoot me a picture of the gas tank. I might be interested. How much? |
Posted By: TimSpangler
Date Posted: June-22-2011 at 12:08pm
|
Shoot me an email and I will send you some pics. I just took it out of the boat yesterday I need to empty the rest of the fuel out and clean it off a bit.
tim.spangler@gmail.com |
Posted By: TimSpangler
Date Posted: July-01-2011 at 11:15pm
|
I am putting the bare hull up for FREE. Anybody who wants it, come and get it. I will keep it here for the next week or so after that it will be headed to the dump.
Shoot me an email if you have any interest. TIM |
Posted By: R. Delgado
Date Posted: July-11-2011 at 12:17am
|
Do you have the shaft log? It is the piece That is glassed into the hull where the shaft comes through?
-Reid |
Posted By: TimSpangler
Date Posted: July-11-2011 at 1:03pm
|
Reid,
I still have it. still in the boat, I can snap a pic tonight if you are interested. TIM |
Posted By: R. Delgado
Date Posted: July-11-2011 at 1:08pm
|
Yeah that would be great! You dont mind cutting it out? How much do you want for it? You can email me @ reid@sonshineministries.com or call at 209-663-0131. Thanks Tim!
-Reid |
Posted By: WVNautique79
Date Posted: July-19-2011 at 1:16pm
| Still have the tracking fins? How much for one? |
Posted By: TimSpangler
Date Posted: July-19-2011 at 3:29pm
|
Yes, I still have 2 of them. $30 +Ship. Shoot me an email
tim.spangler@gmail.com |