Exhaust Manifold off the 82
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=21386
Printed Date: November-20-2024 at 4:15am
Topic: Exhaust Manifold off the 82
Posted By: 82wake2001
Subject: Exhaust Manifold off the 82
Date Posted: April-20-2011 at 7:20pm
When I replaced my heads last summer one of the exhaust manifolds was in bad shape. Finally got it to the local machine shop and they patched it up, pressure tested it and cleaned up the surfaces. Thought I would share the pictures.
 ------------- Joe 1982 ski nautique 2001 "Lady of the Wake" |
Replies:
Posted By: dwcar
Date Posted: April-22-2011 at 1:46am
|
Looks good. Should get you thru another summer or tow ------------- 83Ski |
Posted By: 82wake2001
Date Posted: April-25-2011 at 6:53pm
|
Why do you say that dw? ------------- Joe 1982 ski nautique 2001 "Lady of the Wake" |
Posted By: 81nautique
Date Posted: April-25-2011 at 9:33pm
|
Why is that flange threaded?
------------- You can’t change the wind but you can adjust your sails |
Posted By: 82wake2001
Date Posted: April-26-2011 at 11:02am
|
to mount it to the lathe...same diameter... ------------- Joe 1982 ski nautique 2001 "Lady of the Wake" |
Posted By: 8122pbrainard
Date Posted: April-26-2011 at 11:08am
Joe, Do you mean the mill? I wouldn't what to be swinging that manifold on a lathe!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
82wake2001 wrote:Posted By: 81nautique
Date Posted: April-26-2011 at 11:31am
That's what I thought just haven't seen it done that way. ------------- You can’t change the wind but you can adjust your sails |
Posted By: 82wake2001
Date Posted: April-26-2011 at 1:26pm
|
LOL, ya I should make a rule that I will not reply to a post before 10am. ------------- Joe 1982 ski nautique 2001 "Lady of the Wake" |
Posted By: dwcar
Date Posted: April-29-2011 at 2:31pm
|
The manifolds go thru some tough conditions with the heat from the engine and water sitting in them. I have never seen one patched up. Never know, you might get another 10 years out of them. ------------- 83Ski |