Print Page | Close Window

Maximum propeller size Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=214 Printed Date: January-15-2025 at 10:01am Topic: Maximum propeller size Posted By: 66polyhead Subject: Maximum propeller size Date Posted: March-09-2004 at 12:07am My "66" Wildcat came with 3 props, a 12x12 r.h., a 12x13 r.h., and a 12x15 r.h.. I have recently been given a freebee, a 14x15 r.h.. My center of shaft to bottom of hull distance is 7.875", leaving me only 7/8" clearance,that's approx. 11 percent clearance, well under the 15 percent recommended. Any thoughts on this? Replies: Posted By: reidp Date Posted: March-09-2004 at 1:34am I guess you don't have any paperwork showing what was original. Have you tried contacting Jeff Warner or anyone at CC to see if they can tell you what was original? I would have guessed a boat of that size would have a 13x something but I certainly don't know the particulars. I'd want to use the wheel that allowed the 318 to turn somewhere around 4400.    ------------- ReidP /diaries/details.asp?ID=231&yrstart=1971&yrend=1975 - 1973 Mustang Posted By: Rick Date Posted: March-09-2004 at 3:12am I've run a 13X13 and a 14X11 on my 66 Barracuda. They're performance is about equal with the 14X11 giving a little extra out of the hole. I contacted California correct craft and they told me a 13X13 was original. The only thing I notice witrh the 14X11 is it cavitates more readily and you can hear the bubbles through the hull (The foam has all been removed) ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=250&yrstart=1996&yrend=2000%20" rel="nofollow - 2000 Ski

Print Page | Close Window