Tread pads
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2163
Printed Date: November-22-2024 at 5:32pm
Topic: Tread pads
Posted By: Hoosier303
Subject: Tread pads
Date Posted: July-28-2005 at 7:46pm
| I have available replacement OEM tread pads for any Correct Craft 16-21ft boats from the 60's-70's. These are made from Santaprene in white and are very flexable. Pics available, $20 each plus shipping...thanks |
Replies:
Posted By: Guests
Date Posted: July-28-2005 at 7:56pm
|
I am interested in 4 tread pads. I need to know the size of the pads. The demension that I need is the lenght and width of the pad where it goes into the chrome bezal.
If they say Correct Craft. I have a 1959 Atom Skier. Thank you for your time. John |
Posted By: nautique frk
Date Posted: July-28-2005 at 8:39pm
|
I am interested in 8 pads , please email size and picture .
Thanks , Mike www.westmarine.com ( my email ) |
Posted By: Hoosier303
Date Posted: July-28-2005 at 9:48pm
| pads are 2 1/2x8 inches with the Correct Craft name in the center, email me your addy and I'll send pics..thanks |
Posted By: Guests
Date Posted: July-29-2005 at 2:30am
| Its Santoprene...injectable plastic that is the equivelent of rubber. In this case UV protectant has been added to the plastic.In other words it will last forever. |
Posted By: Hoosier303
Date Posted: July-29-2005 at 8:32pm
| photo attached I think..lol http://img.photobucket.com/albums/v479/Hoosier303/000_0473.jpg |
Posted By: Guests
Date Posted: July-30-2005 at 10:01pm
|
Posted By: Guests
Date Posted: July-30-2005 at 11:04pm
| that is the pics above of the pads |
Posted By: Hoosier303
Date Posted: July-31-2005 at 4:56pm
| I still have some of these available and pic is posted above..thanks |
Posted By: ScottZ
Date Posted: August-01-2005 at 6:25pm
|
Would you hold 4 of them for me. Please email me at the address below for payment and shipping address details. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: Hoosier303
Date Posted: August-01-2005 at 7:11pm
| Please remember that the deminsions listed are for the outside of the pad, do not just measure the opening of your bezel as some of the pad has to go under the opening...thanks |
Posted By: Hoosier303
Date Posted: August-02-2005 at 4:26pm
 thought you maight want to see one on a 68 CC Mustang
|
Posted By: Hoosier303
Date Posted: August-04-2005 at 10:25am
these are still available, and very soon I will have the Correct Craft name plate for the side of the boat. Thanks to those who bought. 
|
Posted By: delasoul
Date Posted: August-07-2005 at 11:07am
|
i'm interested in 2 of them, any way to put them up on ebay ------------- _______________ 67 Ski Naught |
Posted By: Hoosier303
Date Posted: August-07-2005 at 5:51pm
| delasoul please email me |
Posted By: Guests
Date Posted: August-14-2005 at 11:28pm
|
I would like 4 pads. Do you have the chrome housing as the 1957 Atom Skier I bought is missing them. Please let me know the total money due along with an address.
Thanks, Stephen Grosh ssgrosh@hrs-s.com |
Posted By: Guests
Date Posted: August-14-2005 at 11:39pm
|
I am interested in 4 pads. Do you have or know where I can buy the chrome frames? The 1957 Atom Skier I bought is missing the frames & pads.
Please send me your address and the amount due. Thank you, Stephen Grosh |
Posted By: 66altyllskier
Date Posted: August-19-2005 at 1:54pm
|
I'm interested in 4 pads, Bill@windowsxp.pro
Thanks |
Posted By: Hoosier303
Date Posted: August-23-2005 at 1:39pm
| Steve please email me...thanks |
Posted By: Hoosier303
Date Posted: August-23-2005 at 1:41pm
| Bill please email me...thanks |
Posted By: Guests
Date Posted: August-24-2005 at 1:41pm
| Hoosier 303 - What is your email address? Steve |
Posted By: Hoosier303
Date Posted: August-24-2005 at 5:10pm
| it's in my profile |
Posted By: Guests
Date Posted: August-27-2005 at 8:47pm
| 4 for me! Are they still available? What would total cost be to High Point,NC 27262 Marty Mabe ---Vikings425@cs.com |
Posted By: 66altyllskier
Date Posted: August-28-2005 at 1:23am
| Thanks Hoosier303, they seem to be a good fit on our 66 Al Tyll Skier. |
Posted By: Hoosier303
Date Posted: September-29-2005 at 3:14pm
| keep those cards and letters coming, still have more available...thanks |
Posted By: stang72
Date Posted: October-11-2005 at 9:48pm
|
Perfect fit for a 72 Nautique!!!
Thanks Hoosier!!!! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: 68 Skylark
Date Posted: November-01-2005 at 7:06am
|
Hoosier 303,
Thanks for your prompt service I recieved the pads last weekend they look great! These should have been the last thing I bought for the Skylark but ended up being the first! Keith |
Posted By: JoeinNY
Date Posted: November-01-2005 at 8:26am
|
Anybody know of a source of the Chrome Bezels for these pads, someone "upgraded" my 1967 mustang to teak at some point...
-Joe. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1477 - 1983 Ski Nautique 2001 1967 Mustang 302 "Decoy" http://www.youtube.com/watch?v=cO5MkcBXBBs - Holeshot Video |
Posted By: Hoosier303
Date Posted: February-17-2006 at 10:04am
| still have 4 of these beauties needing a home. |
Posted By: coreytread
Date Posted: February-17-2006 at 1:26pm
|
Did you say you had some name plates correct craft, for the side of the boat coming. If so I d like to see pics. ------------- |
Posted By: raceage
Date Posted: March-27-2006 at 2:55pm
|
i defintely need a pair of the tread pads. let me know how you want me to pay for them and everything.
thanks joe joezero54@hotmail.com ------------- 1967 Ski Nautique |
Posted By: PKster
Date Posted: May-20-2006 at 8:49pm
| Have you got any pics to send? I am interested in buying a couple of sets. |
Posted By: ScottZ
Date Posted: May-22-2006 at 9:45am
|
Does anyone have any of the chrome bezels for the step pads? I'm in the market for 4 of them. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: Ryno
Date Posted: August-01-2006 at 3:46pm
|
Do you still have the pads for a 1971 Ski Nautique? ------------- Ryan |
Posted By: tleed
Date Posted: August-08-2006 at 9:11am
|
Still got at least one of these?
Thomas |
Posted By: Ryno
Date Posted: August-08-2006 at 12:11pm
|
thanks for the note...do you have four available?
------------- Ryan |
Posted By: DougsdevilCC
Date Posted: October-14-2006 at 10:01pm
|
Knoww its a little late, have any left?
Doug  ------------- CCcruiser |
Posted By: ScottZ
Date Posted: October-24-2006 at 9:01am
I got a set of 4 that are mfg. by Perko from West Marine. I had to order them online. If you have not located any, let me know and I will get the part # for you. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
JoeinNY wrote:Posted By: DougsdevilCC
Date Posted: October-24-2006 at 10:16am
|
I'm looking for the inserts. If thats the part # for west, yes I would like to have that. Thanks
Doug ------------- CCcruiser |
Posted By: ScottZ
Date Posted: October-24-2006 at 10:25am
|
I think I still have the name of the person I bought my inserts from, but the crome bezels came from West. I will look it up and reply again. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: October-25-2006 at 11:22pm
Send me an email and I will give you the individual's name and address for the step pads. The bezels from Perko are part number 1325DP1CHR. I purchased them from GO2MARINE.COM . Their part number is 86084. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: BOBM
Date Posted: November-20-2006 at 7:19am
|
Posted By: tleed
Date Posted: November-20-2006 at 11:40pm
| What? Who are you? Are you the same Hoosier guy that posted this same message several months ago and hasn't been heard from recently? What's your contact info? |
Posted By: DougsdevilCC
Date Posted: November-21-2006 at 7:03am
|
I think your right about the Hoosier guy. I emailed him and havn't heard anything.
Again, I lookin for 4 step pad inserts for a 64 American Skier, anybody have any ideas what I can do without them? ------------- CCcruiser |
Posted By: 65 'cuda
Date Posted: November-21-2006 at 7:37am
|
I think that I bought the last (4) that he had last winter. I do have the old black inserts from mine along with the original trim rings. They would be better than nothing.
------------- Gary http://www.correctcraftfan.com/diaries/details.asp?ID=941" rel="nofollow - 1965 Barracuda SS |
Posted By: DougsdevilCC
Date Posted: November-21-2006 at 7:40am
|
I have all 4 chrome bezels, just missing the inserts. Would you be interested in getting rid of the old inserts? ------------- CCcruiser |