NEED Python 502 ECM
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=21981
Printed Date: November-18-2024 at 9:44am
Topic: NEED Python 502 ECM
Posted By: tanman915
Subject: NEED Python 502 ECM
Date Posted: June-05-2011 at 9:41pm
|
Need an ECM for 502 python motor. The mechanic at the local marina said that any MEFI 3 can be reprogrammed by PCM ? but I would prefer to have the one for my engine. Any help locating one of these would be greatly appreciated. PCM said they are out of new.
|
Replies:
Posted By: bchesley
Date Posted: June-06-2011 at 11:12am
I am not sure they exist. The python motor is pretty rare as is parts. Are you sure you need one or is your mechanic telling you that you need one.
-------------
2001 SAN
"Python Powered"
|
Posted By: Fl Inboards
Date Posted: June-06-2011 at 4:55pm
Trying to find a Python ECM used will more than likely not happen. Also Not really sure but I think that the Python sported MEFI 4. need to know what year python looks like retail the unit could run anywhere from $660-$1800. Again need to know the year.
-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
1993 Shamrock "fat" 20. 2008 Nautique 196 5.0
|
Posted By: tanman915
Date Posted: June-08-2011 at 2:09am
boat is 99 ski nautique. Its mefi 3 part number delphi 16237009. I finally found one on the internet $700. Didnt know if Id get lucky on a used one being Ive heard these engines dont hold up. I know of course because mine is coming out of a rebuild right now!
|
Posted By: bchesley
Date Posted: June-08-2011 at 6:21pm
I have never heard anyone say that pythons dont hold up. I know of plenty that are worry free. They drink a little oil, but no failures. I wish I could help you more on the ECM, but have you contacted PCM directly?
-------------
2001 SAN
"Python Powered"
|
Posted By: tanman915
Date Posted: June-10-2011 at 1:39am
|
Yes they are not giving much help on the situation. Wont release codes to ecm company to reflash it. Have to send to pcm now to be reflashed. but at least should be able to get up and running again soon
|
Posted By: WakeSlayer
Date Posted: June-10-2011 at 1:52am
What happened to your engine? Hours? Maintenance?
-------------
Mike N
1968 Mustang
|
|