how do i remove anti-siphon valve
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=22592
Printed Date: November-19-2024 at 10:38pm
Topic: how do i remove anti-siphon valve
Posted By: aquaman766
Subject: how do i remove anti-siphon valve
Date Posted: July-12-2011 at 7:53pm
|
My fuel line is clamped to a 90 deg. fitting at the tank. I assume this is the anti-siphon valve. There is a large nut that looks like it holds something inside the tank. If i remove this large nut will i lose a part in the tank? How do i inspect the anti-siphon valve? Do i need to pull a long part out of the tank? I only have a few inches between the top of the tank and the boat hull. Any information would be helpful. thanks
|
Replies:
Posted By: aquaman766
Date Posted: July-13-2011 at 3:38pm
|
Oh well, i guess i'll just remove the nut and hope i don't lose parts into the tank. I'm still not sure if what i'm removing is the AS vavle.
|
Posted By: 8122pbrainard
Date Posted: July-13-2011 at 5:19pm
Ron,
Nothing will fall into the tank. Yes, that fitting on the top is the anti-siphon. There's a ball check inside that you want to take a look at.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: aquaman766
Date Posted: July-13-2011 at 6:43pm
|