Need Parts for my 1973 CC Skier
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=22780
Printed Date: November-18-2024 at 7:41am
Topic: Need Parts for my 1973 CC Skier
Posted By: Bigoutfit
Subject: Need Parts for my 1973 CC Skier
Date Posted: July-24-2011 at 7:17pm
|
Just Bought my first CC boat. It is quiet the basket case,.
I am in need of the following parts: Prop Shaft Strut Prop Shaft Ford 302 Pleasurecraft exhaust manifolds Flame arrestor Raw water pump Transmission cooler Mech fuel pump. Any help would be greatly appreciated. I live in Montana, but if you are willing to ship, I will cover all costs. Thanks Ryan 406-270-4513 |
Replies:
Posted By: Keeganino
Date Posted: July-25-2011 at 12:40am
|
Ryan welcome to the site. List your project in the diaries section and get some pics of it up. I have a 73 Skier. What model do you have? I do not have any parts for you but there are boats being parted out all the time. There are also a few members that might be able to help you out that own shops. ------------- "working on these old boats may not be cost effective but as it shows its what it brings into your life that matters" -Roger http://www.correctcraftfan.com/diaries/details.asp?ID=4897" rel="nofollow - 1973 Skier |
Posted By: Bigoutfit
Date Posted: July-25-2011 at 1:47am
| I believe my boat is a Skier model. That is all it says on the dash. I will post some pictures soon. It has the PCM Ford 302. The Motor was rebuilt, put in the boat then set aside. I bought it and now have to put it all back together. The problem is that some of the parts are missing, and I am unsure of how it all goes back together. Any pictures of that era motor would be appreciated. Thanks. |
Posted By: Keeganino
Date Posted: July-25-2011 at 2:10am
|
I have a lot of 302 pics. The complete manual is available in the reference section. Everything you need to know is in there. I have lots of pics of my motor before and after the restoration. You should start a new thread under Boat Maintenance and post all your questions over there and leave this one for the wanted gear you need.
Mine is a Waukesha "Pleasure Craft Marine Division" 302 This is after the restoration and colors are not exactly original, but similar.  ------------- "working on these old boats may not be cost effective but as it shows its what it brings into your life that matters" -Roger http://www.correctcraftfan.com/diaries/details.asp?ID=4897" rel="nofollow - 1973 Skier |
Posted By: Bigoutfit
Date Posted: July-26-2011 at 4:43pm
| Hey everyone, I was able to find all the parts I needed. Thanks. Please close this post |
Posted By: 8122pbrainard
Date Posted: July-26-2011 at 5:32pm
|
Ryan,
Where in Montana are you? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Bigoutfit
Date Posted: July-27-2011 at 12:31pm
| Whitefish. |