Print Page | Close Window

Ski platform attachment Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=22903 Printed Date: November-19-2024 at 8:33pm Topic: Ski platform attachment Posted By: JetDriver Subject: Ski platform attachment Date Posted: August-01-2011 at 4:13am How are the ski platforms attached to the earlier boats? I have a 77 mustang and am trying to adapt a platform on to it. Is it just screwed in? How many screws? Any pics or advice would be greatly appreciated!! Replies: Posted By: 8122pbrainard Date Posted: August-01-2011 at 9:14am Craig, Since the platforms weren't available fro the factory untill very late 77 and then 78, you may not have any backing glassed into the transom. Some of the early ones were lag bolted at the top and then just small screws at the bottom to keep the brackets from rotating. Through bolting is preffered but you'll need to pull the fuel tank and check the transom. How about some pictures? Welcome to CCfan. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete <

Print Page | Close Window