water separator
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=23004
Printed Date: November-19-2024 at 8:39pm
Topic: water separator
Posted By: lakedog55
Subject: water separator
Date Posted: August-08-2011 at 2:25am
|
If everything goes well will be finally starting to put some parts back in the boat this week. Is there a better water separator than the fram long filter, or is there a better way to mount it than lagging it to the new stringers. It has been a lot of work this far and really do not want to put any more holes than I have to in the stringers.
Thanks Mike  ------------- Lakedog55 |
Replies:
Posted By: BuffaloBFN
Date Posted: August-08-2011 at 10:36am
|
I forget which boat you have...
I bolted a Racor on the back of the engine cradle cross member(where the pylon clamps in). It would be perfect except that racor replacements are pricey. The fix for that is a wix.  ------------- http://correctcraftfan.com/diaries/details.asp?ID=2331&sort=&pagenum=12&yrstart=1986&yrend=1990" rel="nofollow - 1988 BFN-sold "It's a Livin' Thing...What a Terrible Thing to Lose" ELO |
Posted By: lakedog55
Date Posted: August-08-2011 at 1:35pm
|
Thanks,
Exactly what I was thinking, The boat is an 86, It looks like you put the carpet in before the motor. That would make it much easier. Thanks mike. ------------- Lakedog55 |
Posted By: lakedog55
Date Posted: August-08-2011 at 1:36pm
|
Thanks,
Exactly what I was thinking, The boat is an 86, It looks like you put the carpet in before the motor. That would make it much easier. Thanks mike. ------------- Lakedog55 |