Glassing Floor to Hull Question?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=23091
Printed Date: November-19-2024 at 6:03pm
Topic: Glassing Floor to Hull Question?
Posted By: MMT
Subject: Glassing Floor to Hull Question?
Date Posted: August-14-2011 at 12:17am
|
Ok finally ready to glass the floor to the hull. Looked through other threads, but can't seem to find the answer to my question.
What combinations of cloth and biax do most people use after the bedding is done? I didn't foam if that makes a difference. Thanks, Kent ------------- http://correctcraftfan.com/diaries/details.asp?ID=5617&sort=&pagenum=1 - '81 Ski Tique |
Replies:
Posted By: 8122pbrainard
Date Posted: August-14-2011 at 11:11am
|
Kent,
Without doing the foam job, what did you use for the floor? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: wakeboardin2k4
Date Posted: August-14-2011 at 11:37am
|
Subscribing for knowledge when it's my turn to do my floor to hull glass work ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |
Posted By: MMT
Date Posted: August-14-2011 at 12:05pm
|
I used 3/4 plywood. CPES'ed, bedded with peanut butter, and seams only covered with 12" biax. ------------- http://correctcraftfan.com/diaries/details.asp?ID=5617&sort=&pagenum=1 - '81 Ski Tique |
Posted By: wakeboardin2k4
Date Posted: August-14-2011 at 12:14pm
Sounds like a Jeopardy clue that's over my head..."what is stringer restoration? Alex" ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |
MMT wrote:Posted By: vondy
Date Posted: August-15-2011 at 3:30pm
|
I did the same as my stringers minus the biax. 2 layers of 2inch, 4inch and 6inch tape. Actually I think I only did one layer of 6 inch, ran out. ------------- http://correctcraftfan.com/diaries/details.asp?ID=4645&sort=&pagenum=1 - 69 Mustang HM |