Jabsco raw water pump impeller
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=23584
Printed Date: November-19-2024 at 3:49pm
Topic: Jabsco raw water pump impeller
Posted By: john b
Subject: Jabsco raw water pump impeller
Date Posted: September-20-2011 at 11:51pm
|
I would like a little advice even though I know the proper thing to do.
I pick up my new to me 69 or 70 Mustang a week from tomorrow and it hasn't been used in several years. The current owner has had it professionally maintained (according to him) and it reportedly ran well when put away. I would really like to take it out for one ride this year and see what problems, if any, exist. I am concerned about using it without replacing the jabsco impeller, and I have no idea where to get one anyway. Is it prudent to take it out and watch the temp gauge closely? The boat is an H/M, but it has aftermarket iron Osco manifolds on it, so it can't ruin the pair of H/M manifolds I will be putting on it from another boat. The exhaust hoses could use a replacement, but I don't think they are anywhere near a rupture. Any advice from the experts? |
Replies:
Posted By: Gary S
Date Posted: September-21-2011 at 12:10am
I'm no expert but I have stayed at a holiday inn express  West Marine shows they have them,not sure they have them in the stores but you could call, Jabsco # 1210-0001-p or 1210-0003-p or West Marine # 9507369 or 9507591. Seal # for when you rebuild it someday is 96080-0080
I have a new one or a used one if you can't find any,we'd have to find a way to get it to you- ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Luchog
Date Posted: September-21-2011 at 1:51am
|
if you have good water pressure hose it on the trailer and give it a go see what happens. If the pump and exhaust manifolds get hot (manifolds should be hot but still touchable) you'll need to rebuild the pump. if not take it for a test ride! ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=2095" rel="nofollow - 1980 Ski Nautique Commander 351W |
Posted By: Bri892001
Date Posted: September-21-2011 at 12:29pm
|
The impeller is listed at the bottom of this skidim page too:
http://www.skidim.com/products.asp?dept=1096&pagenumber=1&sort_on=&sort_by= - http://www.skidim.com/products.asp?dept=1096&pagenumber=1&sort_on=&sort_by= |