Trans leak at Shift lever
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=23742
Printed Date: November-19-2024 at 1:26pm
Topic: Trans leak at Shift lever
Posted By: Dreaming
Subject: Trans leak at Shift lever
Date Posted: October-04-2011 at 5:34pm
Once I got the boat running on the hose this weekend, I took a careful look to see where my trans was leaking. The only leak I could see was at the shift lever on the case. Can I change the seal on the shift lever without tearing the whole trans down? I'd like to send it to Eric, but that is not currently in the budget... I am working hard to make stringers happen first, if I can hold out on this trans, then The full rebuild will come in a year or two.
|
Replies:
Posted By: eric lavine
Date Posted: October-05-2011 at 10:08am
yes, remove the 3- 1/4 inch bolts on the neutral safety side, remove lever and slide out the valve. it is an o-ring, you'll probably need a gasket also on the neutral safety switch too
-------------
"the things you own will start to own you"
|
Posted By: Dreaming
Date Posted: October-05-2011 at 3:01pm
|
Thanks Eric! I'll see if I can pull and reseal in the next couple of days.
|
|