454 manifold
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=23770
Printed Date: June-25-2024 at 3:08am
Topic: 454 manifold
Posted By: 4woody
Subject: 454 manifold
Date Posted: October-08-2011 at 4:21pm
|
does anyone no were i can get a cheap pcm exhaust manifold R028010..I broke 2 bolts off and really f...up one of the bolt hole once I started drilling on it
|
Replies:
Posted By: Bri892001
Date Posted: October-10-2011 at 5:07pm
I don't know about cheap, but skidim and nautiqueparts have them.
http://mycorrectcraftparts.com/component/virtuemart/?page=shop.product_details&flypage=flypage.tpl&product_id=122&category_id=3 - My Correct Craft Parts seems to have the best price on them.
|
Posted By: 4woody
Date Posted: October-10-2011 at 7:21pm
|
thxs for the info ..I was looking at the riser an the inside of it looks like their was another chamber but it is rusted out should i replace it as well.
|
Posted By: Bri892001
Date Posted: October-10-2011 at 7:29pm
I'd say it's a good idea to replace the riser as well, those are also available as separate parts.
Make sure you install the manifold to riser gasket the correct way. By design, the gasket is meant to intentionally block one of the passages. Ski dim says that it's the passage closest to the exhaust outlet.
|
Posted By: 4woody
Date Posted: October-11-2011 at 9:45pm
|
thanks again for your advice..this my first skiboat ever ..
|
Posted By: Bri892001
Date Posted: October-12-2011 at 12:37pm
|
No problem, hope it goes well. There's tons of info in the Boat Maintenance and Engine Maintenance boards on this site as well.
|
|