Print Page | Close Window

1997 Sport Nautique Control Box Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2447 Printed Date: January-21-2025 at 8:15pm Topic: 1997 Sport Nautique Control Box Posted By: georgeriedel Subject: 1997 Sport Nautique Control Box Date Posted: September-16-2005 at 1:51am Shifter has actually come clean off of the control box - can pull it straight out. Does anyone know how to fix this? Dealer says I need an entirely new control box - and that does not seem right to me. ------------- GR Replies: Posted By: stang72 Date Posted: September-16-2005 at 2:33am The shift handle on older models (morse) I assume is like yours...they slide on the gear mount and tighten with an hex screw.Look for a small hole on the base of the handel...should see a hex screw there...unless it has fallen out.Can't think of why you would need to replace the box. ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air

Print Page | Close Window