Print Page | Close Window

Shaft placement Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2456 Printed Date: January-21-2025 at 8:06pm Topic: Shaft placement Posted By: JEFF KOSTIS Subject: Shaft placement Date Posted: September-17-2005 at 2:17am Has anyone played with the shaft length on a Mustang 17 or something similar. There is a slight amount of room for movement between the rudder, strut and hull bottom. Was wondering if it changes wake size or help keep the nose down due to the different waterflow. I need to replace the shaft at some point(very slight bend at taper) and was wondering if a inch either way would make any difference to improve performance before I purchase the same shaft. Thanks in advance! ------------- MUSTANG COUNTRY http://www.correctcraftfan.com/diaries/details.asp?ID=1074 - 1974 Mustang 17 http://www.correctcraftfan.com/diaries/details.asp?ID=1093 - 1976 Mustang 17

Print Page | Close Window