prop size
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=24598
Printed Date: November-19-2024 at 9:46am
Topic: prop size
Posted By: grim007
Subject: prop size
Date Posted: January-09-2012 at 5:38pm
|
buying a 1972 ski mustang with 318 what prop should be on that boat? ------------- shaken not stirred |
Replies:
Posted By: TRBenj
Date Posted: January-09-2012 at 6:36pm
|
The original prop would have most likely been a 12x14 Federal. If buying a new prop, a 12x13 OJ, or a 12.5x12 Acme would both be fairly comparable.
13" diameter props are too large for the 16' hull. ------------- |
Posted By: goshen10
Date Posted: January-29-2012 at 4:00pm
| I may have a left 12 x 14 good condition if ur looking |
Posted By: 8122pbrainard
Date Posted: January-30-2012 at 9:31am
"left" as in LH rotation or "left" as in stil on hand? This Mustang if the engine hasn't been changed, would need a RH prop. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
goshen10 wrote:Posted By: goshen10
Date Posted: January-30-2012 at 10:04pm
|
It is a LH rotation sorry it wont work out for you
|