Trailer fenders
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=24960
Printed Date: November-19-2024 at 9:53am
Topic: Trailer fenders
Posted By: Bohinny
Subject: Trailer fenders
Date Posted: February-21-2012 at 10:10pm
|
I have a 1994 Ramlin tandem axle trailer that came with my 1995 SNOB and the fenders need to be replaced they are rusted out. I contacted ramlin and they will not sell direct to me and the dealer wanted a little over 800 dollars for the pair. Does anybody have a source for these? I can get 14 gauge tandem teardrops for $180 but the length is 66" and I measure 65" give or take on the originals. I figured Ramlin is not making fenders and is buying them to put on their trailers so I would think that they whould be standard size. I Need to get this thing going.
Thanks, Billy ------------- Billy |
Replies:
Posted By: Ed
Date Posted: February-22-2012 at 3:46am
|
Billy,
Put a picture of the fender and it's mounting point on here. The 66" might work, it sounds standard. |
Posted By: Bohinny
Date Posted: February-22-2012 at 4:55pm
Here is a pic of the fender ------------- Billy |
Posted By: MartyMabe
Date Posted: February-22-2012 at 5:18pm
|
http://www.ebay.com/itm/TRAILER-FENDERS-TANDEM-Backs-9x66-HORSE-PAIR-/190499049814?pt=Motors_RV_Trailer_Camper_Parts_Accessories&vxp=mtr&hash=item2c5aa0d156 - EBay
http://easternshore.craigslist.org/boa/2788285324.html - Craigslist http://bakersfield.craigslist.org/rvs/2856684659.html - x http://www.easternmarine.com/15-tandem-teardrop-trailer-fender-steel-21903 - Eastern ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: Ed
Date Posted: February-22-2012 at 11:48pm
| Good eye Marty, those will work. |