2000 Sport Nautique- motor cover liner
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=25172
Printed Date: November-19-2024 at 9:34am
Topic: 2000 Sport Nautique- motor cover liner
Posted By: jccds
Subject: 2000 Sport Nautique- motor cover liner
Date Posted: March-10-2012 at 3:40pm
|
I went to get my boat ready for this coming spring and summer and found that the foam piece on the inside top of my motor cover has fallen partially. Any ideas as to what type of adhesive he use to reapply the foam back to the inside of it. i assume that it has to be somewhat heat resistant. Thanks |
Replies:
Posted By: 8122pbrainard
Date Posted: March-10-2012 at 3:57pm
|
Solvent based contact adhesive would be my first choice. However some here swear by the 3M spray adhesives out of a rattle can. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: gun-driver
Date Posted: March-11-2012 at 12:43am
X-2 |
8122pbrainard wrote: