Water pump
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=25371
Printed Date: November-19-2024 at 5:45am
Topic: Water pump
Posted By: chisum5013
Subject: Water pump
Date Posted: March-27-2012 at 1:49am
|
I replaced the impeller on a 1980 SN and did not mark the pump when I took it off like a big dummy. Does the screw on the pump face out or in? Thanks for the help in advance. ------------- Chris C |
Replies:
Posted By: john_33612
Date Posted: March-27-2012 at 8:46am
| LH motors in , RH motors out |
Posted By: TRBenj
Date Posted: March-27-2012 at 11:02am
If the engine in question is a PCM Ford Windsor, this is correct. It would be reversed for a Commander, as they installed the RWP on the port side instead of the starboard. ------------- |
john_33612 wrote:Posted By: rader957
Date Posted: April-14-2012 at 11:14pm
|
I just did the pump on my 1980 SN yesterday! my screw was facing outboard with the PCM ford windsor. i just moved down to milton last month- any ski spot recommendations, PM me! was in the blackwater this week. ------------- 1980 Ski Nautique |