95 SNOB walk thru windshield
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=25622
Printed Date: November-19-2024 at 4:44am
Topic: 95 SNOB walk thru windshield
Posted By: Bohinny
Subject: 95 SNOB walk thru windshield
Date Posted: April-17-2012 at 7:03pm
I am in the process of tracking down the center section of my walk thru windshield, but I have a question on the hinge side. Is the pin that holds the hinge together one soild piece? When I bought the boat it was missing so I do not have any reference. Here are some pics of what I have. I am guessing that it is one piece and mine was cut out. So if that is the case is the a source for the pins? Is it possible to remove the hinge side of the windshield frame so I can try and remove broken pin with out breaking the glass.   ------------- Billy |
Replies:
Posted By: skijones
Date Posted: April-19-2012 at 8:01pm
| I have a 99 Snob. Will get some pictures and post |
Posted By: Bohinny
Date Posted: April-23-2012 at 11:32pm
|
My walk thru came in to day from N3 boatworks. I still am having trouble figuring out the hinge. It looks to me that it was a single pin from top to bottom. It looks like it might have even been glued. Does anybody no for sure? Thanks Billy ------------- Billy |
Posted By: ultrarunner
Date Posted: April-24-2012 at 12:10am
|
It's a single pin on my Sport. Ultra |
Posted By: Bohinny
Date Posted: April-24-2012 at 12:49am
|
Thanks, that is what I thought. I wonder where I can find a pin or how to make one? ------------- Billy |
Posted By: 8122pbrainard
Date Posted: April-24-2012 at 10:09am
Get a diameter and go to your local weld shop. They may have some stainless TIG wire close to the needed diameter. The hardware store will have some but not in stainless. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Bohinny wrote:Posted By: Bohinny
Date Posted: April-24-2012 at 10:12am
Thanks. I will check my buddy is a welder so bet I can get it cheap  ------------- Billy |