Refurbishing Boat Cover
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=25650
Printed Date: November-19-2024 at 5:45am
Topic: Refurbishing Boat Cover
Posted By: tjamesbo
Subject: Refurbishing Boat Cover
Date Posted: April-19-2012 at 2:59pm
My Boat cover Pictured below is getting a bit tired and starting to deseam in just a couple of places I am keen to refurb and strengthen these bits rather than buy a new one The Cover and the areas are shown below I can see several options for repairing / beefing up those corners but am not sure what the cover is made of it isnt stretchy or canvas its like tarp stuff smooth on top some webbing visible in the worn bits but fairly smooth underneath Main joints are sewn I can get tarp repair tape and adhesive patches but the adhesive needs to be right for the material so need to know what it is any ideas ? reccomendations on best way to beef up The Bow area is the main bit / point loading 
|
Replies:
Posted By: tjamesbo
Date Posted: April-19-2012 at 3:01pm
here is the cover in full  
|
Posted By: crobi2
Date Posted: April-19-2012 at 4:09pm
|
Can you find any old manufacturer's tag on it anywhere? It appears to be a nice cover with many years left in it. Nice boat too! ------------- C-Rob 2000 SAN |