1983 SN 2001 Windshield
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=26128
Printed Date: November-26-2024 at 11:35pm
Topic: 1983 SN 2001 Windshield
Posted By: baysport22
Subject: 1983 SN 2001 Windshield
Date Posted: May-24-2012 at 10:20pm
| I bought the windshield glass for my 83 ski nautique 2001 through nautique parts/ white lake marine. the glass has no curve in it but is a littlbe bit flexable. The base of the windshield frame has a curve to it about a 2 inches. So am i suppose to flex the glass 2 inches to get it into place??!! Im afraid its going to break! |
Replies:
Posted By: 8122pbrainard
Date Posted: May-24-2012 at 11:11pm
|
Scott, I'm sorry to hear that you went through White Lake and not your local glass place. I'm sure you paid dearly for it. I'm also sorry you didn't check here first. Yes, the glass is flat and bends when it's put into the frame. Anyway, a big welcome to CCfan.  Our normal question for anyone new is: We want pictures!!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: baysport22
Date Posted: May-24-2012 at 11:23pm
| thank you for the response. I will try bending it a little more i just dont want to break it. Thought maybe they sent me the wrong thing. I have an album of the floor being redone i will upload. Boat is still in progress. |
Posted By: dwcar
Date Posted: May-25-2012 at 1:57am
|
Scott, Pete is correct. I took mine apart to paint the frame. It is kinda scary. Get a big table. A soft cloth to lay over the table. soapy water, rubber mallet and an extra set of hands. Make yourself a paper pattern just in case you do break it. good luck. ------------- 83Ski |