To trim tab, or not to trim tab?
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=262
Printed Date: September-30-2024 at 11:53pm
Topic: To trim tab, or not to trim tab?
Posted By: 66polyhead
Subject: To trim tab, or not to trim tab?
Date Posted: March-31-2004 at 1:18am
|
I have tried everything I can think of to keep my Wildcat from porposing at speeds over 40 m.p.h.. Redistrubiting weight, propellers, contemplating a belly tank, a cooler full of beer in the bow, 10 gallons of gas in the tank, ect... So now I made a hinged stainless, stationary trim tab, with 2 nice stainless turnbuckles. I have it planned to mount in the center, flush with the bottom of the hull. But, here's the big BUT! I cringe at the thought of drilling through the hull below the waterline. Does any body have any input? I modeled mine after a 1995 Malibu, so I guess the concept works.
|
Replies:
Posted By: 77stang
Date Posted: June-11-2004 at 1:05pm
|
how did this situation turn out?
|
|