Bunk width for 1981 Nautique
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2625
Printed Date: January-16-2025 at 3:09am
Topic: Bunk width for 1981 Nautique
Posted By: markb
Subject: Bunk width for 1981 Nautique
Date Posted: October-19-2005 at 4:38am
|
Hi,
I'm currently in the process of swapping my '81 nautique over to another trailer. So before I do I need to get the bunk widths right so I can install new ones to the trailer. I assume width at bank and front could be enough as there doesn't appear to be a big chamfered edge on the existing bunk? Cheers Mark |
Replies:
Posted By: surroundsound64
Date Posted: October-22-2005 at 11:57pm
|
Good question. I'd just try to get all the measurements that I could... If I'm understanding the question right.
------------- 1981 Ski Nautique 2000 SAN Looking for a 2000-2006 SAN |
Posted By: jbear
Date Posted: October-23-2005 at 11:35am
|
markb; Do you need to know how far apart the bunks are? If so , I can go measure mine ('80) and let you know....john ------------- "Loud pipes save lives" AdamT sez "I'm Canadian and a beaver lover myself"... |
Posted By: surroundsound64
Date Posted: October-23-2005 at 1:41pm
Ya, if that's what you're asking I can measure my 81's. Just let me know before Tuesday b/c I'll be out of town for a while after then. ------------- 1981 Ski Nautique 2000 SAN Looking for a 2000-2006 SAN |
jbear wrote:Posted By: markb
Date Posted: October-23-2005 at 11:51pm
|
Hi,
Bunk width is what I am asking, taper angle would be very handy as well. I did a measurement off my old trailer and it appears it is around 1280mm at the back tapering down to 580mm at the front. This is done with boat on the trailer so I'd love a more accurate measurement if you guys can provide one. Cheers Mark |