Print Page | Close Window

Bearing buddies Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=26379 Printed Date: November-19-2024 at 12:44am Topic: Bearing buddies Posted By: cragginshred Subject: Bearing buddies Date Posted: June-10-2012 at 9:30pm So one of the caps is missing on my DHM dual axle hub and i am thinking i should just do a full on bearing buddy and grease job to know it's been done (purchased 95 SN since last fall). My question is I have watch YT trailer videos about this (were not boat trailers though) but I am confused do I need to pull the whole hub or just the packed bearing casings. Any links to step by step procedures for noobs? Replies: Posted By: SNobsessed Date Posted: June-10-2012 at 11:35pm If water got in the hub, by all means pull it & repack the bearings - the sooner the better. They will rust & then you're replacing them. I have a cone style bearing packer ($10 item) & it works good to push new grease in. ------------- “Beer is proof that God loves us and wants us to be happy.” Ben Franklin

Print Page | Close Window