Print Page | Close Window

Morse control click

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=26833
Printed Date: November-18-2024 at 9:31pm


Topic: Morse control click
Posted By: Messer
Subject: Morse control click
Date Posted: July-06-2012 at 12:22am
short version- We just got a 83 SN from a long shop stay.. runs great, throttle and shift need a slight adjustment (found the how to inside the forums) but my question is- There is no "Click" when shifting from forward to neutral to reverse. I have never had a morse not click or have that definitive "feel" for when she is in gear. My initial thought is pull the guts out of the morse, WD40 and loosen up old grease and funk, regrease and she may start "clicking". Has anyone else had this issue and more importantly, is there a "fix" to it?

Could it be the shift on the tranny? doesn't seem like it would be.

Thanks for any advice!

-------------
Johnnie
1987 Ski Nautique
1981 Fish Nautique
1980 Fish Nautique
1979 Fish Nautique
1986 Master Craft
1984 American Skier



Replies:
Posted By: GlassSeeker
Date Posted: July-06-2012 at 12:55am
Are you used to outboards or IO's?

it should click when you go into neutral -- it doesn't click going into gear.

Maybe I'm not understanding the problem

-------------
This is the life


Posted By: TRBenj
Date Posted: July-06-2012 at 1:23am
Originally posted by GlassSeeker GlassSeeker wrote:

Are you used to outboards or IO's?

it should click when you go into neutral -- it doesn't click going into gear.

Maybe I'm not understanding the problem

It sounds like the f/n/r detents are vague. A morse should snick into and out of gear.

I would do exactly as you describe- disassemble, clean and regrease. It should feel like a million bucks afterwards. If it goes back to feeling vague once the cables are reconnected, then replace them.

-------------


Posted By: Messer
Date Posted: July-06-2012 at 8:28am
I'm an inboard guy all the way. I've had 3 Fish Nautiques, 1 Master Craft, 1 American Skier and 1 Ski Nautique... and they all have the click.

TRBenj- will do, should be simple...ha, famous last words!

-------------
Johnnie
1987 Ski Nautique
1981 Fish Nautique
1980 Fish Nautique
1979 Fish Nautique
1986 Master Craft
1984 American Skier


Posted By: fanofccfan
Date Posted: July-06-2012 at 10:20am
Chris Mars (storm34) has a how to thread on this procedure that describes this process with pictures. Google "morse control rebuild Correctcraftfan". I tried the internal site search and came up empty


Posted By: KRoundy
Date Posted: July-06-2012 at 5:27pm
Link for Morse control rebuild:


http://www.correctcraftfan.com/forum/forum_posts.asp?TID=24751&title=mv1-stepbystep-teardown-clean-and-assemble" rel="nofollow - Morse rebuild

Watch for those springs!

-------------
Previous: 1993 Electric Blue/Charcoal Ski Nautique
Current: 2016 Ski Nautique 200 Open Bow


Posted By: Messer
Date Posted: July-08-2012 at 1:42am
Nice, I missed it on search. Appreciate the help fellas!

-------------
Johnnie
1987 Ski Nautique
1981 Fish Nautique
1980 Fish Nautique
1979 Fish Nautique
1986 Master Craft
1984 American Skier



Print Page | Close Window