parting out 1980 ski nautique
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=27161
Printed Date: December-04-2024 at 9:30pm
Topic: parting out 1980 ski nautique
Posted By: keithvan77
Subject: parting out 1980 ski nautique
Date Posted: July-25-2012 at 1:24am
|
Parting out 1980 nautique Heres a short list If you dont see it ask i probably have it 351w. $450-sold Manifolds and risers. $150 Drivers seat frame. $75 2 airguides. $140 set -sold Rudder set $200-sold Carb $100 Too much to list Email keith.vanlandingham@yahoo.com Prices do not include shipping or paypal charges Thanks Keith |
Replies:
Posted By: gR@HaM
Date Posted: July-25-2012 at 1:30pm
|
Hi Keith, I'm after a steering wheel, 1 x airguide pitot, throttle control lever and drivers side rear engine mount. Can you help with any of these? Thanks ------------- '82 Ski Tique |
Posted By: GoneJon076
Date Posted: July-25-2012 at 4:35pm
|
Still have the rudder and port? Could you shoot me an email with photos at jbentley@kindellproperties.com? Thanks |
Posted By: wakeboardin2k4
Date Posted: July-25-2012 at 5:51pm
|
exhaust tips? I would be very interested in those! ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |
Posted By: keithvan77
Date Posted: July-26-2012 at 3:41am
|
Gr- have the throttle and the engine mount. Would like to sell them in pairs Gone- yes i have the rudder and port you have firat dibs Wakeboardin. I still have the tips Email me and ill send pics Keith.vanlandingham@yahoo.com |
Posted By: keithvan77
Date Posted: July-26-2012 at 3:54am
| Gone ill shoot you an email tommorow |
Posted By: gR@HaM
Date Posted: July-26-2012 at 4:52am
Ok, no probs buying as a pair as long as they fit my 1982 ski tique, I shall send you another email very shortly. Thanks! ------------- '82 Ski Tique |
keithvan77 wrote:Posted By: GoneJon076
Date Posted: July-26-2012 at 1:40pm
| Awesome...Thanks! |
Posted By: gR@HaM
Date Posted: July-26-2012 at 2:53pm
|
Keith you have mail! ------------- '82 Ski Tique |
Posted By: keegan99usa
Date Posted: July-26-2012 at 2:55pm
|
Hull, dash, and windshield? Interested in those Dan ------------- Is it Summer yet?? |
Posted By: keithvan77
Date Posted: July-26-2012 at 3:59pm
| Keagan. Have the hull and the windshield. What do you mean by the dash? Gauges? On the 80 the dash is attached to the hull |
Posted By: keegan99usa
Date Posted: July-26-2012 at 4:11pm
|
Price? No problem on the dash, do not need gauges. ------------- Is it Summer yet?? |
Posted By: RedandWhite73
Date Posted: July-27-2012 at 11:57am
|
Hey Keith, Do you have a prop available? What size is it? I am also looking for the prop shaft and the guide that bolts into the bottom of the boat. Do you know if it would fit on a 73' Southwind? Dan |
Posted By: Got Tiques
Date Posted: July-27-2012 at 1:24pm
|
Keith, I'm interested in the Airguides and exhaust manifolds and risers. Are the EM/R's PCM or other manufacturer, Cast iron, 3" outlet, any cracks or known leaks??? Do the airguides work, are they surface mount? speed range of 50 mph, condition of Chrome and bezels and face lettering? Can you post some photos and get a ground shipping price to Zip 12302? Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: 8122pbrainard
Date Posted: July-27-2012 at 2:58pm
|
Todd, How come your avitar goes to Banana George's old boat that states it's now owned by Chuck Decker aka: h2oskijumper? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: TRBenj
Date Posted: July-27-2012 at 3:53pm
|
Because he hasn't put the banana boat in the diaries under his own name. I suppose I should get on that! You may recall that my uncle Todd owns the boat now- it was at the last ct mini and made the calendar. ------------- |
Posted By: keithvan77
Date Posted: July-27-2012 at 4:08pm
|
Dan- there pcm manifolds no leaks that im aware of. The airguides are promised to someone if that falls thru ill let you know. Send me your e mail ill get you some pics cant post them on here from my phone Todd- i have the strut and shaft. Send me your email and ill get you some pics. Call me9048949982 and maybe we can figure out the shaft |
Posted By: keithvan77
Date Posted: July-27-2012 at 4:10pm
| Sorry guys i mixed the names up |
Posted By: RedandWhite73
Date Posted: July-27-2012 at 5:21pm
|
My email is: dan.crosby@envelopcovers.com |
Posted By: Got Tiques
Date Posted: July-28-2012 at 1:45am
|
Pete Brainard, Sorry for the confusion, but I'm somewhat computer challenged, and am learning about the boats and motors all the time, but REALLY am into Nautiques. I made the 2009 Lake George Reunion (fourth fastest Nautique) Benjamin's had it rigged somehow!! and the 2011 CT Mini Reunion. Other professional commitments do consume some of my other time. My Dad had a '68 Mustang purchased new that Tim has shown on this site, but have owned or still own in order of purchase 1988 Ski, 1990 Ski, 1995 Ski, 1971 Skier (Now Tim's), 1997 Ski. 2004 Ski (6L), 1990 Ski, 1978 Tique (formerly Tim's) 1986 Barefooter (Formerly Banana George's), 1963 Plastic Classic, and finally 1968 Mustang. Each of my boats is a "Project" and this site really helps. I am trying to keep it original and do enjoy you input!! Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: keithvan77
Date Posted: July-28-2012 at 4:34am
|
Ski pylon. $125-sold Rubrail. No rope- $25 Engine cover $50 Observer seat frame$75 Wiring harness $50 Trailer $125 |
Posted By: gR@HaM
Date Posted: July-28-2012 at 9:39am
|
Keith did you get my email? Thanks ------------- '82 Ski Tique |
Posted By: RedandWhite73
Date Posted: July-30-2012 at 3:23pm
|
Does anyone here know if the shaft that connects the prop to the engine and shaft guide that mounts to the bottom of the hull would fit on a 1973 Southwind? Dan |
Posted By: TRBenj
Date Posted: July-30-2012 at 3:42pm
|
I think youre asking about the driveshaft and the strut? If so, I believe the answer is no to both- the 2nd gen Ski Nautique and Southwind do not share those same parts. Take a look at what you currently have- I believe a SW should have a 6A strut, and possibly a 41" shaft. ------------- |
Posted By: RedandWhite73
Date Posted: July-30-2012 at 5:44pm
|
Keith, It sounds like the strut and drive shaft will not work for my application. I appreciate your prompt responses. Good luck parting-out your boat. Dan TRBenj, do you know of any places that I could take the strut and shaft to have them straightened? |
Posted By: keithvan77
Date Posted: July-31-2012 at 1:00am
| Dan- no problem sorry i could not help. Good luck with the boat |
Posted By: keithvan77
Date Posted: July-31-2012 at 1:05am
|
Still have parts Hull-200 Trailer need help-100 Windshield complete-175 Engine cradle -150 Shaft and strut -125 Manifolds Mufflers-35 Gauges teleflex-50 Transmission-150 Rubrail-25 Seat frames-75 each Morse control-100 Forward engine mounts -100 |
Posted By: TRBenj
Date Posted: July-31-2012 at 10:44am
|
Id love to see pictures of the trailer, manifolds, drivers seat brackets and the transmission. TRBenj@gmail.com ------------- |
Posted By: rex minton
Date Posted: July-31-2012 at 11:35am
|
Hi this is rex could you email picture of gauges thank you very much rex@krgutility.com or rex.minton@charter.net ------------- rex minton |
Posted By: 62 wood
Date Posted: July-31-2012 at 2:07pm
|
Do you have the plastic "Correct Craft" rear hull emblems? Are they the white bases with black painted letters? Also back seat? Anyone know if these items would fit my 73? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: TRBenj
Date Posted: July-31-2012 at 2:14pm
'80 will have the black/chrome emblems with the different mounting pattern. Youre not going to get any better than Stan's emblems, Steve!  Whether the back seat will interchange depends on whether the 2 boats in question have the ski pockets. Ive seen boats with one, two or none. They narrow the bottom cushion. The back cushion *should* be the same size and shape. Of course, the upholstery styles will be very different (oven mitt vs. pleats, if original). Since its just vinyl covered foam, you can just order everything you need from Christine's... they'll require a few basic measurements, but do have the patterns and can supply both vinyl and foam. ------------- |
Posted By: rex minton
Date Posted: July-31-2012 at 4:02pm
|
do you have pictures of set of aiguid for 140.00 ------------- rex minton |
Posted By: keithvan77
Date Posted: July-31-2012 at 10:47pm
|
The airguides are sold. Sorry |
Posted By: Got Tiques
Date Posted: August-01-2012 at 1:08am
|
Keith, I think I am in line for the manifolds and risers. I'm just waiting for pictures and a shipping cost estimate to ZIP 12302. Let me know what you need from me. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: keithvan77
Date Posted: August-01-2012 at 2:01am
|
Todd your right you are in line for the manifolds. Lost track its like ha ing two jobw keeping up with it all. I am working on shipping. Those things are heavy when there together. I never got your email. Can you send email and ill swnd pics Thanks Keith |
Posted By: JOHNNY207125
Date Posted: August-01-2012 at 3:32pm
| hello there....model number of the velvet drive ?....thanks |
Posted By: Got Tiques
Date Posted: August-03-2012 at 2:05am
|
Keith, I want to buy your manifolds and risers. Please send the cheapest shipping ground freight estimate to Todd Benjamin, 1014 Cherokee Rd., Scotia, New York, 12302. Email pictures to pyramidguy1@hotmail.com Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: gR@HaM
Date Posted: August-05-2012 at 10:12am
|
Keith, any news on cost of shipping of those engine mounts? Soon as you let me know i can send the cash. Would also be interested in photos of morse control. Do you have a steering wheel? Thanks ------------- '82 Ski Tique |
Posted By: keithvan77
Date Posted: August-05-2012 at 12:37pm
| Graham sorry been really busy. Ill get that to ya asap. Send yoy so pics of tue morse |
Posted By: gR@HaM
Date Posted: August-05-2012 at 1:12pm
Nice one, thanks  ------------- '82 Ski Tique |
Posted By: nautiquelover1988
Date Posted: August-05-2012 at 6:15pm
| Tracking fins?????? |
Posted By: keithvan77
Date Posted: August-05-2012 at 7:21pm
|
Johnny velvet drive 1017001 Yes have tracking fins. One is straight the other is a little bent |
Posted By: nautiquelover1988
Date Posted: August-05-2012 at 7:38pm
|
How mch for the one straight fin, will it work on a 1988 ski nautique 2001. Email me at braedon15@gmail.com |
Posted By: nautiquelover1988
Date Posted: August-05-2012 at 7:51pm
|
How mch for the one straight fin, will it work on a 1988 ski nautique 2001. Email me at braedon15@gmail.com |
Posted By: White Laker
Date Posted: August-05-2012 at 10:12pm
| Do you still have the 351? Thanks |
Posted By: keithvan77
Date Posted: August-05-2012 at 11:34pm
| White laker. Sorry. The engine is spoken for but if it changes ill let you know. Thanks |
Posted By: keithvan77
Date Posted: August-09-2012 at 2:54pm
|
Parts still available Complete windshield. Glass good frame a little faded- make offer Bare hull-make offer Engine cradle/bracket- $100 Observer seat brackets $75 Drivers seat brackets-$50 Mirror w/brackets $25 Shaft and assembly$125 Strut$50 Teleflex gauges(no fuel)$50 351 right hand $400 |
Posted By: wakeboardin2k4
Date Posted: August-09-2012 at 3:57pm
|
Keith- I didn't receive those tips yet. Figured I'd mention it incase something weird happened during shipping ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |
Posted By: keithvan77
Date Posted: August-09-2012 at 7:40pm
| Eric. The post office said it was delivered on 8/1 |
Posted By: nautique frk
Date Posted: August-09-2012 at 8:36pm
|
Keith, I just sent you a messsage on one of the parts |
Posted By: nautique frk
Date Posted: August-11-2012 at 11:55am
| Keith I will see your brother on Monday |
Posted By: keithvan77
Date Posted: August-12-2012 at 12:57am
| Todd. I have not forvot about the manifolds. Been busy. My assistant is back this week so i should know something mon or tues |
Posted By: alanton08
Date Posted: August-28-2012 at 1:41am
|
Hi, I was wondering if you still had the trailer? Thanks, Brian |
Posted By: keithvan77
Date Posted: August-28-2012 at 3:58am
| Yes. It needs help though. Give me your email and ill send ya some pics |
Posted By: 93/70 ccpb
Date Posted: August-29-2012 at 11:52pm
|
hello keith.do you still have both seat frames.i need both .call or e-mail me.thanks dan 330-524-6983 or ccsnpb@sbcglobal.net call or send me your phone number so i can contact you thanks dan. ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: wakeboardin2k4
Date Posted: August-30-2012 at 10:22pm
|
Keith- those tips ever make their way back to you by chance? Still no sighting on my end ------------- "I'm planning to bring my girl that rides on a trailer with me and leave my girl that complains about camping at home" |
Posted By: v.getem
Date Posted: September-05-2012 at 1:56pm
| Will the drive shaft and coupling work on my 84sn 2001? If so I would be interested in it thanks. |
Posted By: gR@HaM
Date Posted: September-05-2012 at 6:53pm
|
Alright Keith, I never received that paypal request to wire the money across for the transmission mount and throttle control. Sorry on iPhone don't have your email address to hand.. Any idea when you can get them in the post? Thanks ------------- '82 Ski Tique |
Posted By: keithvan77
Date Posted: September-06-2012 at 2:54am
|
Still have the seat frames Graham. Sorry its sent |
Posted By: gR@HaM
Date Posted: September-06-2012 at 6:23am
|
Thanks Keith $170 should now be in your account ------------- '82 Ski Tique |
Posted By: 93/70 ccpb
Date Posted: September-06-2012 at 9:37am
|
hello keith can you call me about seat frames i need both.330-524-6983 or send me an e-mail at ccsnpb@sbcglobal.net with your number so i can contact you thanks dan in ohio. ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: diggit
Date Posted: September-07-2012 at 11:17am
|
Hi Keith Do you still have the ampmeter gauge? If so, I'm interested in that item. I'm also looking for a rear seat, if you have that still. Thanks Dug |
Posted By: Nelson
Date Posted: September-09-2012 at 12:07pm
|
I noticed you had the carb listed in the begining of the thread, if its still for sale let me know which one it is and if it needs a rebuild. You can email if you want nelsonpeters@roadrunner.com Thanks ------------- 1986 Ski Nautique 2001 |
Posted By: gugi55
Date Posted: September-14-2012 at 1:35am
|
I am looking for a ski pylon do you still have it and how much are you looking for Paul gugi55@hotmail.com |
Posted By: gR@HaM
Date Posted: September-21-2012 at 9:50pm
Keith, did you get those parts sent out ok? Nothing recieved yet.. thanks ------------- '82 Ski Tique |
Posted By: keithvan77
Date Posted: September-21-2012 at 10:04pm
| Yes they were sent. Probably going through customs |
Posted By: gR@HaM
Date Posted: September-21-2012 at 10:16pm
nice one, thanks!  ------------- '82 Ski Tique |
Posted By: 81 tique
Date Posted: September-22-2012 at 11:01pm
|
Do you still have the manifolds and risers? Thanks ------------- '81 Ski Nautique New Hampshire Seacoast |
Posted By: nautique frk
Date Posted: September-24-2012 at 3:25pm
|
Keith, I got the motor box this am thanks for dropping it off for me that worked out perfect and only cost me 80 bucks for freight |
Posted By: Got Tiques
Date Posted: September-24-2012 at 11:22pm
|
Keith, I think I am waiting in line for a shipped price to me for the manifolds and risers. The photos look like manifolds and risers!! Send the price to Todd Benjamin, @ pyramidguy1@hotmail.com. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: Riley
Date Posted: September-24-2012 at 11:52pm
How was it shipped? |
Posted By: nautique frk
Date Posted: September-25-2012 at 2:04am
| Southeastern Freight Lines to my work on a pallet for 80 bucks |
Posted By: nautique frk
Date Posted: September-25-2012 at 2:06am
| I used our company account since SEFL is one of our main carriers we use Old Dominion too |
Posted By: gR@HaM
Date Posted: September-29-2012 at 8:29am
Hi Keith, did they give you a tracking number by any chance? ------------- '82 Ski Tique |
Posted By: gR@HaM
Date Posted: October-08-2012 at 7:43pm
Keith, has been 5 weeks since sending payment and parts haven't arrived, did you get a tracking number or anything I can use to chase up? ------------- '82 Ski Tique |
Posted By: gR@HaM
Date Posted: November-02-2012 at 7:11am
Keith, you visited the site yesterday why are you ignoring my numerous PMs, emails, voicemails.. ------------- '82 Ski Tique |
Posted By: turningpoint84
Date Posted: November-02-2012 at 4:31pm
|
That's pretty ***************ed up Graham...... Hope ya get your stuff. ------------- Proud 1968 mustang owner and now http://www.correctcraftfan.com/diaries/details.asp?ID=6454&sort=&pagenum1" rel="nofollow - 1970 Mustang |
Posted By: John1971
Date Posted: November-04-2012 at 2:03pm
Just wanted to know if you still had carb and how much to ship to Canada T7X 1L4  ------------- John1971bm |
Posted By: gR@HaM
Date Posted: November-04-2012 at 8:50pm
|
Good luck.. ------------- '82 Ski Tique |
Posted By: Gary S
Date Posted: November-04-2012 at 10:26pm
Yea thats not too cool. Keep us informed Graham ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Dadof8
Date Posted: April-28-2013 at 1:57am
|
Keith, Do you still have the manifolds, and do they possibly fit the 302 ford on the 77 Ski Tique? Thank, Newbi ------------- Make each day on the water last as long as possible. Unless it's because the boat died. 77 Ski Tique 302 Ford |
Posted By: Twothousandone
Date Posted: April-29-2013 at 3:31pm
| Keith, old thread, but do you still have the strut and driveshaft assembly, and would they fit on a 1985 2001....thanks! |
Posted By: frogger88
Date Posted: May-02-2013 at 1:49pm
|
Hey Keith, Do you happen to have the motor box hinges still? |
Posted By: blakest4
Date Posted: May-14-2013 at 1:43am
| Hello Keith, I would like the drivers seat frame. My email is blakest4@hotmail.com and phone is 479-871-0505. please email,text, or call me. thanks, Blake |
Posted By: gR@HaM
Date Posted: May-14-2013 at 5:17am
|
I suggest you are very careful giving keith vanlandingham your money, he ripped me off and after getting in contact numerous times via email, phone, CCF, I never got a reply ------------- '82 Ski Tique |
Posted By: pumpdad
Date Posted: June-01-2013 at 10:49pm
|
Do you have the steering cable? Thanks, Chad ------------- Chad Lankford |
Posted By: kelly mac 67
Date Posted: July-22-2013 at 9:45pm
|
Do you still have tack oil amp gauges? If so do you have pictures? ------------- Kelly Mac |
Posted By: baitkiller
Date Posted: July-22-2013 at 10:32pm
|
Why did you bugger Graham? That wasn't very nice. Did you even have the decency to offer him a reach-around? Well? ------------- Jesus was a bare-footer............. |
Posted By: Dan in CT
Date Posted: July-22-2013 at 11:17pm
| Do you have a working horn? |
Posted By: rex minton
Date Posted: July-24-2013 at 11:13am
|
IAM SORRY BUT I DONT KNOW MR.GRAHAM HAVE GOOD DAY ------------- rex minton |
Posted By: gR@HaM
Date Posted: July-26-2013 at 9:01am
Ill hunt him down and get my money back one day BK!!!!! http://www.spokeo.com/search?q=Keith+Vanlandingham&global=true&sns7=t66#:6478897571" rel="nofollow - Keith Vanlandingham ------------- '82 Ski Tique |
Posted By: jdewayne
Date Posted: August-02-2013 at 4:16am
|
Can you send me pics of trailer? J.dewayne@hotmail.com |
Posted By: pumpdad
Date Posted: August-02-2013 at 9:07am
|
Keith I am in need of the teak step plates. Do you still have them? Thanks, Chad ------------- Chad Lankford |
Posted By: gR@HaM
Date Posted: August-02-2013 at 9:40am
Seriously, why are so many people not reading the above thread!!!!Keith did me over a long while back by taking my money and not sending the goods - he has since not logged on to CCF  ------------- '82 Ski Tique |