Cutlass Bearing
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=27339
Printed Date: November-18-2024 at 7:38pm
Topic: Cutlass Bearing
Posted By: marmon77
Subject: Cutlass Bearing
Date Posted: August-06-2012 at 2:54pm
| Did a search but can't find where to buy a cutlass bearing, please advise. Thanks |
Replies:
Posted By: FLSKIER
Date Posted: August-06-2012 at 3:28pm
|
http://www.deepblueyachtsupply.com ------------- 82 Ski Tique |
Posted By: marmon77
Date Posted: August-06-2012 at 3:37pm
| Thanks Flskier. I have a 1988 Ski Nautique 2001 could you advise on which size I would need. I looked at Nautique parts and they are considerably more. I just don't wanna buy wrong size. |
Posted By: 8122pbrainard
Date Posted: August-06-2012 at 3:56pm
http://www.deepblueyachtsupply.com" rel="nofollow - For the convenience of all, here's a proper link ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
FLSKIER wrote:Posted By: 8122pbrainard
Date Posted: August-06-2012 at 3:58pm
You will want the 1" ID by 1&1/4" OD. Length if you want to go all the way is 6" but, I've never seen a need for it to be that long. It's my opinion that 4" works just fine. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: marmon77
Date Posted: August-06-2012 at 5:40pm
| Thanks for the info guys! |
Posted By: marmon77
Date Posted: August-06-2012 at 5:53pm
| One more thing guys is the 1988 Ski Nautique 2001 1" or 1 1/8" dia. |
Posted By: TRBenj
Date Posted: August-06-2012 at 5:55pm
------------- |
Posted By: marmon77
Date Posted: August-06-2012 at 6:06pm
| Thanks I should have been mor especific the Shaft on my 1988 SN 2001 is 1" if I'm reading what Pete said correctly? Just trying to be sure check and recheck don't wanna order thr wrong bearing. |