Need Rear Mounts PCM 1:1
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=27641
Printed Date: November-17-2024 at 7:32pm
Topic: Need Rear Mounts PCM 1:1
Posted By: echo
Subject: Need Rear Mounts PCM 1:1
Date Posted: August-28-2012 at 12:22pm
| Mine are frozen. Need a new set pcm 1:1 transmission. |
Replies:
Posted By: dwcar
Date Posted: August-28-2012 at 3:15pm
|
http://www.skidim.com/prodinfo.asp?number=RA091003" rel="nofollow - mounts ------------- 83Ski |
Posted By: kapla
Date Posted: August-28-2012 at 4:19pm
|
try dipping them in a mix of atf fluid and acetone, let it sit for a while and work it out in a bench vise... if they collapse then you could say at least you tried to save them...lol ------------- <a href="">1992 ski nautique |
Posted By: ArtCozier
Date Posted: January-08-2013 at 11:35pm
|
I'm pretty sure that I have a pair, but I'll need the part number that's cast into the stringer bracket. It will start with R090...... ------------- "Art" |
Posted By: 8122pbrainard
Date Posted: January-09-2013 at 9:41am
Jim, Many do find them locked up but as mentioned they can be freed up. I suggest removing them as well then get the rubber off and then go after the split clamp area with penetrating oil. The 50/50 mix of ATF and acetone is proven to be fantastic. Then the next best is Kroil. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
echo wrote:Posted By: phatsat67
Date Posted: January-09-2013 at 11:12am
|
If you don't get them freed up give me a call! Also Echo what year is the boat as there were some differences on the 1:1 boats. 1998 changed but there were very few 1:1 boats made in those years. ------------- |