Need Replacement Windshield Glass
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=27967
Printed Date: November-17-2024 at 9:47pm
Topic: Need Replacement Windshield Glass
Posted By: jto
Subject: Need Replacement Windshield Glass
Date Posted: October-01-2012 at 5:13pm
| Please Help. We just purchased a 1993 Ski Nautique OB. The front left windshield (slightly curved)needs to be replaced. Correct Craft does not have this replacement part. We are in the Los Angeles area and could use some help finding the right resource for this part. Any help will be greatly appreciated. |
Replies:
Posted By: TRBenj
Date Posted: October-01-2012 at 5:15pm
|
The glass appears to be curved (it flexes when installed)... but I assure you that the glass itself is flat. A glass shop should be able to cut a tempered piece for you. ------------- |
Posted By: boat dr
Date Posted: October-01-2012 at 7:27pm
|
Tim, tempered glass will shatter if you try that.My understanding is the "raw" glass is cut to size , then it is tempered. Someone "correct" me if I am wrong.I have found a source that can replicate the glass and the extrusions... jto, call Karen @ CorrectCraftParts 1-318-299-8547 She can have it drop shipped to you....Billy ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: TRBenj
Date Posted: October-01-2012 at 7:36pm
|
You could be right... Im no glass expert! Correction: A glass shop should be able temper a cut piece for you. ------------- |
Posted By: jto
Date Posted: October-01-2012 at 7:50pm
|
Thank you to those that have and are responding to my request. So far Correct Craft has not been that helpful. Hopefully Karen can supply the piece or at least get me a template or their vendor that they contract with. Glass is cut to size then tempered. The set-up and cost for the one piece will be out of sight. Clearly my motivation to find one sitting on a shelf somewhere. |
Posted By: jto
Date Posted: October-01-2012 at 7:55pm
|
Can you possibly share the resource information that may also be able to help? Thank you very much, JTO |
Posted By: boat dr
Date Posted: October-01-2012 at 10:53pm
CorrectCraftParts can have the glass cut,tempered and shipped to your adress. All she needs is a credit card, year model and an adress.What other info do you need? Billy ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
jto wrote:Posted By: jto
Date Posted: October-02-2012 at 12:54am
|
Hi Billy. First ... I sincerely appreciate your help! I wasn't sure if you had a second resource of Karen @ Correct Craft doesn't pan-out. If its a straight forward as it sounds I'm home free. We've skied behind this boat for almost 20-years. However, we just took Ownership of it. |
Posted By: boat dr
Date Posted: October-02-2012 at 1:47am
|
She has shipped a few to fans on this site...The name says it all.... And there are none sitting on a shelf at the Orlando warehouse  ------------- boat dr /diaries/details.asp?ID=4631 - 1949 Dart /diaries/details.asp?ID=1533 - 1964 American Skier |
Posted By: jto
Date Posted: October-02-2012 at 2:29am
| As they say you can always wish! My intent is to call her first thing in the morning. All My Best and thank-you again, JTO |
Posted By: phatsat67
Date Posted: October-02-2012 at 12:52pm
| I have alot of side glass. If you can get measurments it would be very possible I have or more. |
Posted By: jto
Date Posted: October-02-2012 at 1:16pm
| Hi Keith, Thanks for the reply. I'll check the measurements today along with who manufactured the windshield. Best, JTO |
Posted By: jto
Date Posted: October-02-2012 at 1:19pm
| Sorry about the name. I picked "Keith" up from the email address. |
Posted By: phatsat67
Date Posted: October-13-2012 at 1:26pm
| Did you ever get any measurements? I do not have the size that fits the sport boats but I have an idea the only port side glass I have is for the snob. Get measurements from the insides of the frame where it meets the glass. Probably the most accurate way. |