Exhaust Manifolds for 318
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28261
Printed Date: November-17-2024 at 7:24pm
Topic: Exhaust Manifolds for 318
Posted By: sampson
Subject: Exhaust Manifolds for 318
Date Posted: November-03-2012 at 8:39pm
| Hello I have a 71 Barracuda and I need exhaust manifolds, let me know what u have and how much. thanks |
Replies:
Posted By: 8122pbrainard
Date Posted: November-03-2012 at 10:32pm
Knowing what engine you have I feel would be very beneficial to what you are looking for!!!     Now, if our old member 79 was still around, I'd be safe to to say he would have come out with a "dumb f*ck" comment/idiot!! WHAT ENGINE DO YOU HAVE!!!!!!!! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
sampson wrote:Posted By: 75 Tique
Date Posted: November-03-2012 at 10:50pm
Uhhh Pete? Before you let someone's post give you an aneurysm (again) look at the title of the thread. Time to get those bifocals checked. ------------- _____________ “So, how was your weekend?” “Well, let me see…sun burn, stiff neck, screwed up back, assorted aches and pains….yup, my weekend was great, thanks for asking.” |
Posted By: 8122pbrainard
Date Posted: November-04-2012 at 8:22am
Yup Larry, I'm sure the "dumb f*ck" on this one!!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: reidp
Date Posted: November-04-2012 at 11:16am
|
These manifolds can be readily found from a number of sources on line. I got my last set from eBasic Power. I believe Hurrikane (sp) Marine has a lot of Chrysler stuff as well. ------------- ReidP /diaries/details.asp?ID=231&yrstart=1971&yrend=1975 - 1973 Mustang |
Posted By: sampson
Date Posted: November-04-2012 at 1:40pm
|
reidp thanks 8122pbrainard you are the man, so funny with your all your comments, doesn't matter what site your on there is always guys like u. Keep up the good work, you are really helping out |
Posted By: 62 wood
Date Posted: November-13-2012 at 11:41pm
|
Michael, Did you find a set of manifolds? I have a complete 318 Im probably not going to be using. Would have to check, but I think it has a set of manifolds. ohhh, and "pay no attention to the man behind the curtain" ... Pete's really pretty harmless....  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1117&sort=&pagenum=6" rel="nofollow - 64 American Skier 62 Classic.. 73 Ski Nautique |
Posted By: 65Cuda
Date Posted: November-14-2012 at 12:00pm
|
is this for a 71 318? anything after 67, you should be able to find manifold parts easily...60-66 318 poly's are hard to find. Check out dave@hurrikain.com or info@anthonykeatsmarine.com I have been searching high and low for manifold parts for my poly...ended up getting an elbow for port side, still looking form starboard side. |
Posted By: sampson
Date Posted: November-16-2012 at 2:45pm
|
thanks guys, I should have waited to post this because I am going to take apart the engine and see what I have, just in case I have to scrap the engine. After I do that then I will know exactly what I need thanks. And yes I wasn't worried about 8122pbrainard I couldn't have said some nasty stuff back but I decided to be the bigger man. As a professional firefighter I deal with a lot tougher people than some guy hiding behind a computer making rude comments trying to intimidate people. |
Posted By: ArtCozier
Date Posted: December-26-2012 at 11:57pm
|
Osco, Barr Marine, and a number of other manufacurers make replacement manifolds for MoPars; check out their websites. Old 318s are hard to kill. ------------- "Art" |