sano / gunnel step pads
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28338
Printed Date: November-18-2024 at 3:47pm
Topic: sano / gunnel step pads
Posted By: wetneck
Subject: sano / gunnel step pads
Date Posted: November-14-2012 at 12:31am
was informed today that the oem step pads on my 99 ski are not produced anymore and was wanting to replace them over the winter.... i was inquiring if anyone has replaced theirs and are happy with the product..
have found hydroturf and dynogrip...uncut... any others to look at ?
thanks in advance
|
Replies:
Posted By: 8122pbrainard
Date Posted: November-14-2012 at 9:36am
John,
Who have you contacted looking for the pads?
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: wetneck
Date Posted: November-14-2012 at 10:22am
|
Naitique parts said it was no longer available, do you know otherwise as I'd like to keep it OEM
|
Posted By: MartyMabe
Date Posted: November-14-2012 at 11:23am
http://www.n3boatworks.com/eshopitems_cat_5045-94870.Seadek_amp_Sano_Non_Skid.htm" rel="nofollow - N3
-------------
66 Skylark
http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN
If you're not living in NC, you're just camping out!
|
Posted By: TRBenj
Date Posted: November-14-2012 at 11:24am
I cut my own step pads out of hydroturf for my '90, in the '94-01 style. Trace your originals and it would be a piece of cake- the stuff is great to work with (its sandable) and has held up great.
Good link Marty, but N3 does not appear to have what he's looking for.
-------------
|
Posted By: phatsat67
Date Posted: November-16-2012 at 11:52am
|
Not so fast Tim! I am working on two possible solutions. I have a customer that wants to update his to Teak Style Seadek and another that wants new black so in the next few weeks I should have examples of both replacement parts!
|
Posted By: Air206
Date Posted: November-16-2012 at 1:44pm
If anybody has a 8" x 12" scrap...think of me! I need some for trailer repair......Thanks Guys.
-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq
|
|