what does this gauge ?
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=28386
Printed Date: November-27-2024 at 1:27am
Topic: what does this gauge ?
Posted By: chicagozalewski
Subject: what does this gauge ?
Date Posted: November-19-2012 at 10:01pm
what does this gauge ? thanks |
Replies:
Posted By: Donald80SN
Date Posted: November-19-2012 at 10:08pm
|
Looks like a depth finder to me. Donald |
Posted By: Gary S
Date Posted: November-19-2012 at 10:09pm
|
It looks like a Lawrance water depth gauge ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Donald80SN
Date Posted: November-19-2012 at 10:11pm
|
Gary, My Gardens boat did not come with one of these, back in the day. FYI, Donald |
Posted By: chicagozalewski
Date Posted: November-19-2012 at 10:25pm
|
thanks for the reply whether it is a basic cruise control correct craft buttons on the boat SAN210 2001y.? where to find them? if anyone has pictures of these buttons? |
Posted By: Gary S
Date Posted: November-19-2012 at 10:33pm
Don, I have a line on a Lego Land boat,are they any good?  ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Donald80SN wrote:Posted By: chicagozalewski
Date Posted: November-20-2012 at 12:11am
|
"Instead, all functions of the Cruise system – on, off, engage, disengage, increase, decrease and resume – are controlled by a pair of built-in buttons that allow the system to function with the simplicity of an automotive cruise control. " my boat probably has cruise control corect craft what they look like and where can I find these buttons? if anyone has pictures of these buttons? |
Posted By: quinner
Date Posted: November-20-2012 at 12:39am
If it is the basic cruise the gauge should look like the one right next to the drivers finger in front of the cupholder. If in the dash probably the spot that has the depth gauge in it, furthest to the right. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: Bri892001
Date Posted: November-20-2012 at 1:28am
| Was Correct Craft Cruise it's own thing? Or was it a rebadged Perfect Pass? |
Posted By: Donald80SN
Date Posted: November-20-2012 at 11:19am
|
[/QUOTE] Don, I have a line on a Lego Land boat,are they any good? [/QUOTE] Yes, they are but they are 2012 models so you will have to come out of retirement and make payments for the next 15 years to get one. 
|
Posted By: MartyMabe
Date Posted: November-20-2012 at 11:29am
Steering Wheel Cap is where some mounted. ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: quinner
Date Posted: November-20-2012 at 12:25pm
|
Brian, it is a Perfect Pass unit, the basic cruise had no paddle wheel, it was RPM based only. Marty, the steering wheel mount was not used until 06' maybe even later then that, it's possible that unit only works with Drive by Wire also. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: Donald80SN
Date Posted: November-20-2012 at 2:39pm
Chris, I am looking at bigger boats right now for next season and I was wondering about the RPM based speed control. Does it work well or how does it compare to the paddle wheel control? I would think the paddle wheel is better and is based on actual speed, but I may be wrong. You post is very timely for me. Thanks, Donald |
Posted By: Bri892001
Date Posted: November-20-2012 at 3:19pm
Donald, I have a Perfect Pass Stargazer. It doesn't have a paddlewheel but it does have GPS. It also has an RPM option. It has multiple modes, RPM, Wakeboard, (Trick and Jump which I never use) and Slalom. When you use the slalom, it actually has a calibration mode, to map speeds to particular RPMs. Honestly, I think that the slalom mode then winds up going pretty much off of RPM then. I'm pretty confident I could use RPM for everything, wakeboard, slalom etc. The only time it wouldn't work well, is if you had a boat that might be coming on and off plane at a particular RPM. |
Posted By: quinner
Date Posted: November-20-2012 at 3:55pm
|
Donald, I have had both and the paddle wheel does work better in most situations. PW version: can be set in RPM or Speed modes, you set speed prior to the run, not effected by changing boat/wind direction, gauge displays speed/rpm, etc., up/dn arrows on display can adjust on the run speeds in .2 or .3 mph increments, resumes previous speed on re-starts once withing a few MPH of set speed Basic version: rpm based, set speed on the go, no display, requires tweaks on the fly if conditions such as wind/direction change, up/dn arrow adjustments similar to PW version, resumes previous speed on re-starts once withing a few MPH of set speed The PW version definitely requires less user input so the driver's attention is much more focused on the skier and the surroundings, not as much speed and throttle. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: Donald80SN
Date Posted: November-20-2012 at 6:37pm
|
Brian and Chris, Thanks for the input that was a big help. Donald |
Posted By: malibud
Date Posted: December-07-2012 at 11:39am
| ya what quinner said . I had a rpm only and added a paddle wheel.. much better a lot less messing with controls . Justa little scary drilling the hole |